Wiki source code of 1. Technical specifications
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% data-numbered-headings-start="1" style="--numbered-headings-start: 0;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %) | ||
| 2 | = Technical specifications = | ||
| 3 | |||
| 4 | [[image:1734108445189-173.png||data-xwiki-image-style-alignment="center"]] | ||
| 5 | |||
| 6 | BMS USB-RS485 1.x interface adapter provides conversion of USB bus signals to RS-485 bus signals. After connection to a PC device is recognized as a virtual COM port. | ||
| 7 | |||
| 8 | Adapter includes a switch to connect a 120 Ohm terminal resistor to RS-485 lines. | ||
| 9 | |||
| 10 | Device is compatible with the following operating systems: Windows 98, Windows ME, Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8/8.1, Windows 10, Mac OS 8/9, Mac OS X, Linux 2.4 and above. | ||
| 11 | |||
| 12 | The BMS USB-RS485 1.x interface adapter performs the following functions: | ||
| 13 | |||
| 14 | * conversion of USB interface signals to a two-wire trunk RS-485 interface signals with galvanic isolation (Vrms = 1000V); | ||
| 15 | * power supply and information exchange with BMS Logic devices using the ElectricDeviceMonitor software. | ||
| 16 | |||
| 17 | == Specifications == | ||
| 18 | |||
| 19 | |**Parameter**|**Value** | ||
| 20 | |Supply voltage, V|5 (USB port) | ||
| 21 | |Current consumption without external load, mA (max)|80 | ||
| 22 | |Maximum current consumption, mA|600 | ||
| 23 | |Maximum output current via 5V line, mA|400 | ||
| 24 | |RS-485 bus speed, bit/s|600, 1200, 2400, 4800, | ||
| 25 | 9600, 19200, 38400, 57600, 115200 | ||
| 26 | |RS-485 bus speed for communication with BMS Logic, bit/s|115200 | ||
| 27 | |Dimensions (length × width × height), mm|91 × 50 × 27 | ||
| 28 | |Weight, g|70 | ||
| 29 | |(% colspan="2" %)**Operating conditions** | ||
| 30 | |Operating temperature range, ° С|-40÷75 | ||
| 31 | |Degree of protection from external influences|IP20 | ||
| 32 | |||
| 33 | == Connection diagrams == | ||
| 34 | |||
| 35 | How to use the BMS USB-RS485 1.x adapter is described in the «BMS 2.1 – Connection manual». | ||
| 36 | |||
| 37 | Figure below shows a diagram of connecting a BMS Logic device to a PC using the BMS USB-RS485 1.x. | ||
| 38 | |||
| 39 | [[image:1734108445190-152.png||data-xwiki-image-style-alignment="center" height="373" width="300"]] | ||
| 40 | |||
| 41 | Next figure shows an option to connect the BMS USB-RS485 1.x to the RS-485 bus, which already integrates several devices. If the BMS USB-RS485 1.x is the last device on the bus, the 120 Ohm switch must be set to position "1". | ||
| 42 | |||
| 43 | [[image:1734108445191-579.png||data-xwiki-image-style-alignment="center" height="310" width="600"]] |