Changes for page 3.3 Control

Last modified by Admin on 2025/04/09 12:15

From version 9.1
edited by Admin
on 2025/02/24 11:27
Change comment: Uploaded new attachment "1740396445096-172.png", version {1}
To version 6.3
edited by Admin
on 2025/02/24 10:58
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -69,8 +69,14 @@
69 69  * Min-Max SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if any cell has 100% SOC, b) 0% if any cell has 0% SOC;
70 70  * Max-Min SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if all cells have 100% SOC, b) 0% if all cells have 0% SOC.
71 71  
72 -Other parameters:
72 +To change other settings of SOC estimation, select the "Control → SOC estimation” section:
73 73  
74 +
75 +In this section:
76 +
77 +* (((
78 +Other parameters:
79 +)))
74 74  * Scale the final SOC – a flag to scale the battery SOC by the following values;
75 75  * SOC corresponding to 0% – the battery SOC that sets to be 0%;
76 76  * SOC corresponding to 100% – the battery SOC that sets to be 100%.
... ... @@ -81,6 +81,7 @@
81 81  * Coulomb counting correction (temperature) – the dependence of battery capacity on temperature;
82 82  * Coulomb counting correction (cycles) – the dependence of battery capacity on the number of charge-discharge cycles.
83 83  
90 +
84 84  === SOC correction ===
85 85  
86 86  The BMS Mini device can recalculate the battery SOC after long-term storage or after long-term working in the case when the battery was not charged fully or discharged totally. Recalculation is done based on the tabular dependency Uocv = Uocv (SOC, t) (see [[SOC estimation>>doc:||anchor="HSOCestimation"]]).
1740396388810-840.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -19.6 KB
Content
1740396445096-172.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -21.8 KB
Content