Changes for page 3.3 Control

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -69,8 +69,14 @@
69	69	* Min-Max SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if any cell has 100% SOC, b) 0% if any cell has 0% SOC;
70	70	* Max-Min SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if all cells have 100% SOC, b) 0% if all cells have 0% SOC.
71	71
72		-Other parameters:
	72	+To change other settings of SOC estimation, select the "Control → SOC estimation” section:
73	73
	74	+
	75	+In this section:
	76	+
	77	+* (((
	78	+Other parameters:
	79	+)))
74	74	* Scale the final SOC – a flag to scale the battery SOC by the following values;
75	75	* SOC corresponding to 0% – the battery SOC that sets to be 0%;
76	76	* SOC corresponding to 100% – the battery SOC that sets to be 100%.
...	...	@@ -81,6 +81,7 @@
81	81	* Coulomb counting correction (temperature) – the dependence of battery capacity on temperature;
82	82	* Coulomb counting correction (cycles) – the dependence of battery capacity on the number of charge-discharge cycles.
83	83
	90	+
84	84	=== SOC correction ===
85	85
86	86	The BMS Mini device can recalculate the battery SOC after long-term storage or after long-term working in the case when the battery was not charged fully or discharged totally. Recalculation is done based on the tabular dependency Uocv = Uocv (SOC, t) (see [[SOC estimation>>doc:||anchor="HSOCestimation"]]).