Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/04/09 12:15
From version 27.4
edited by Admin
on 2025/02/24 12:33
Change comment: There is no comment for this version
To version 27.3
edited by Admin
on 2025/02/24 12:31
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -527,14 +527,13 @@
527 527  * Switch off the discharging (AUX) contactor if the SOC is too low;
528 528  * Minimum SOC – a minimum SOC value, when reached, the auxiliary (AUX) discharging contactor opens, %;
529 529  * Tolerant SOC – a permissive SOC value, upon reaching which the auxiliary (AUX) discharging contactor re-closes, %;
530 -* Switch off the discharging (AUX) contactor if the cell voltage is out of the range;
531 -* Minimum cell voltage, V;
532 -* Maximum cell voltage, V;
533 533  * Switch off the discharging (AUX) contactor if the battery voltage is out of the range;
534 -* Minimum battery voltage, V;
535 -* Maximum battery voltage, V;
536 -* Errors 1, 2 to open the auxiliary discharging contactor – bitfields to choose the errors which will open the auxiliary discharging contactor.
531 +* Minimum voltage – minimum battery voltage, V;
532 +* Maximum voltage – maximum battery voltage, V;
533 +* Switch off the discharging (AUX) contactor on errors – the auxiliary (AUX) discharging contactor opens if the following errors occur: Undervoltage, Overcurrent, High temperature (DCH), Short circuit, Critical error.
537 537  
535 +=== ===
536 +
538 538  === Cell balancing ===
539 539  
540 540  Balancing makes the voltage of all cells be equal to the minimum cell voltage.