Skip to Content
Last modified by Admin on 2025/03/18 12:50
From version 7.1
edited by Admin
on 2025/02/06 11:41
Change comment: There is no comment for this version
To version 3.3
edited by Admin
on 2024/12/09 16:56
Change comment: Update document after refactoring.

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -Battery management systems.BMS Mini S.WebHome
1 +drafts.BMS Mini S.WebHome
Content
... ... @@ -16,11 +16,14 @@
16 16  
17 17  [[image:1733740731820-300.png||data-xwiki-image-style-alignment="center" height="172" width="453"]]
18 18  
19 -|**Parameter**|**Value **
20 -|Overall dimensions (length × width × height), mm|124.5 × 117 × 17
19 +|(((
20 +**Parameter**
21 +)))|**Value **
22 +|(((
23 +Overall dimensions (length × width × height), mm
24 +)))|124.5 × 117 × 17
21 21  |Mounting dimensions (length × width), mm|115 × 111
22 22  |Mounting holes|M3
23 -|Headers X1, X3-X9 type|Molex series Micro-Fit
24 24  
25 25  == Headers ==
26 26  
... ... @@ -28,7 +28,7 @@
28 28  
29 29  [[image:1733740765989-365.png||data-xwiki-image-style-alignment="center" height="423" width="526"]]
30 30  
31 -=== X1 – header for contactors ===
34 +=== Х1 – header for contactors. ===
32 32  
33 33  [[image:1733738660904-795.jpeg||data-xwiki-image-style-alignment="center" height="96" width="316"]]
34 34  
... ... @@ -56,12 +56,13 @@
56 56  (((
57 57  **ATTENTION!!!**
58 58  The load should be connected to +12V and OUTx pins. The feedback signal should be connected to FBx and GND pins. Below is an example of connecting the BMS to a contactor:
59 -[[image:1733738760833-185.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
60 60  )))
61 61  
64 +[[image:1733738760833-185.png||data-xwiki-image-style-alignment="center"]]
65 +
62 62  === X2 – mini-USB connector. ===
63 63  
64 -Mini-USB connector is used for configuring the BMS via ElectricDeviceMonitor.
68 +Mini0USB connector is used for configuring the BMS via ElectricDeviceMonito
65 65  
66 66  === X3 – header for discrete inputs and outputs signals.[[image:1733738860923-996.png||data-xwiki-image-style-alignment="center" height="90" width="283"]] ===
67 67  
... ... @@ -176,6 +176,7 @@
176 176  
177 177  === Connecting battery cells ===
178 178  
183 +
179 179  To connect battery cells, follow figure below. Incorrect connection of the cells can damage the BMS Mini.
180 180  
181 181  Begin the connection with the negative line of the battery: the “C0“ is connected to the “B-“, then the first cell (C1) is connected, then the second (С2), etc. If not all inputs of the cells are used, then the remaining inputs are connected to the cell with the most potential.