Skip to Content

Changes for page 3.5 External equipment

Last modified by Admin on 2025/05/30 16:50
From version 7.2
edited by Admin
on 2025/02/11 17:22
Change comment: There is no comment for this version
To version 6.1
edited by Admin
on 2025/02/11 17:21
Change comment: Uploaded new attachment "1739294477662-343.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -30,12 +30,11 @@
30 30  
31 31  Communication parameters via the Basic J1939 protocol are configured in the “External equipment – Basic J1939 vehicle” section:
32 32  
33 -[[image:1739294413209-387.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="76" width="600"]]
34 34  
35 35  In this section:
36 36  
37 37  * Enable – a flag to enable communication using the protocol;
38 -* CAN port – port which is used to communicate with the vehicle:
37 +* CAN port – port which is used to communicate with the charger:
39 39  ** CAN1 (ext);
40 40  ** CAN2 (int);
41 41  * BMS message ID – an identifier of the first message of the device in the J1939 network;
... ... @@ -45,37 +45,10 @@
45 45  
46 46  Communication parameters for the Evocargo vehicle are configured in the section "External equipment – Evocargo vehicle":
47 47  
48 -[[image:1739294432727-315.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="83" width="600"]]
47 +[[image:1734357302172-818.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="89" width="600"]]
49 49  
50 50  In this section:
51 51  
52 52  * Enable – a flag to enable communication with the Evocargo vehicle;
53 -* CAN port – port which is used to communicate with the vehicle:
54 -** CAN1 (ext);
55 -** CAN2 (int);
56 56  * Minimum voltage – minimum battery voltage, V;
57 57  * Maximum voltage – maximum battery voltage, V.
58 -
59 -=== BMS IMD ===
60 -
61 -To change communication parameters with an insulation monitoring device BMS IMD, select the "External equipment → BMD IMD " section:
62 -
63 -[[image:1739294477662-343.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="100" width="600"]]
64 -
65 -In this section:
66 -
67 -* Enable – a flag to enable communication with the IMD;
68 -* CAN port – port which is used to communicate with the IMD:
69 -** CAN1 (ext);
70 -** CAN2 (int);
71 -* Node ID – a CANopen address of the BMS IMD device;
72 -* Configure IMD – a flag to override the IMD warning and alarm settings;
73 -* Allow work if battery modules are joined – a flag to allow the BMS IMD to work only if battery modules are joined;
74 -* Alarm threshold – a threshold resistance value to set insulation alarm, Ohm;
75 -* Warning threshold – a threshold resistance value to set insulation warning, Ohm.
76 -
77 -=== Unibat vehicle ===
78 -
79 -To change communication parameters with vehicle with Unibat battery installed, select the "External equipment → Unibat vehicle" section:
80 -
81 -[[image:1739294567774-840.png]]
1739294567774-840.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -84.0 KB
Content