Skip to Content

Changes for page 4.2 Battery

Last modified by Admin on 2025/06/19 11:13
From version 5.1
edited by Admin
on 2024/12/26 15:59
Change comment: There is no comment for this version
To version 4.1
edited by Admin
on 2024/12/05 12:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -Battery management systems.BMS Main 3.4\. Monitoring.WebHome
1 +drafts.bms-main-3.4\. Monitoring.WebHome
Content
... ... @@ -72,26 +72,6 @@
72 72  * Total energy+ - total energy received by the battery modules from the charger and during recuperation, Wh;
73 73  * Total energy- - total energy spent by the battery modules on the load, Wh;
74 74  * Total balanced energy – total energy dissipated by the battery modules on balancing resistors, Wh;
75 -* Input singals:
76 -** Battery cover – a signal from the battery cover;
77 -** Charger connected – a signal indicating that charger is connected;
78 -** Power up/down request – a request to power down the device;
79 -** Inhibit charging – a command to open the charging contactor;
80 -** Inhibit discharging – a command to open the discharging contactor;
81 -** CH contactor feedback – a signal from charging contactor feedback loop;
82 -** DCH contactor feedback – a signal from discharging contactor feedback loop;
83 -** Insulation status – a signal from an insulation monitoring device;
84 -** Charge request – a request to close the charging contactor;
85 -** Precharge request – a request to close the precharging contactor;
86 -** Discharge request – a request to close the discharging contactor;
87 -** PCH contactor feedback – a signal from precharging contactor feedback loop;
88 -** CH/DCH contactor feedback – a signal from charging/discharging contactor feedback loop;
89 -** Main contactor feedback – a signal from main contactor feedback loop;
90 -** Interlock – a signal from interlock loop;
91 -** Fuse 1, Fuse 2, Fuse 3 – signals from fuses;
92 -** Circuit breaker status – status of protection disconnector;
93 -** Balancing request – a request to balance the cells;
94 -** Close Main contactor – a request to close the main contactor.
95 95  * Internal signals – device internal signals:
96 96  ** Low SOC – a signal indicating the discharged battery;
97 97  ** High charging current;