Skip to Content

Changes for page 4.2 Battery

Last modified by Admin on 2025/06/19 11:13
From version 4.1
edited by Admin
on 2024/12/05 12:54
Change comment: There is no comment for this version
To version 6.1
edited by Admin
on 2024/12/26 16:01
Change comment: Uploaded new attachment "1735228916836-719.png", version {1}

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.bms-main-3.4\. Monitoring.WebHome
1 +Battery management systems.BMS Main 3.4\. Monitoring.WebHome
Content
... ... @@ -72,6 +72,26 @@
72 72  * Total energy+ - total energy received by the battery modules from the charger and during recuperation, Wh;
73 73  * Total energy- - total energy spent by the battery modules on the load, Wh;
74 74  * Total balanced energy – total energy dissipated by the battery modules on balancing resistors, Wh;
75 +* Input singals:
76 +** Battery cover – a signal from the battery cover;
77 +** Charger connected – a signal indicating that charger is connected;
78 +** Power up/down request – a request to power down the device;
79 +** Inhibit charging – a command to open the charging contactor;
80 +** Inhibit discharging – a command to open the discharging contactor;
81 +** CH contactor feedback – a signal from charging contactor feedback loop;
82 +** DCH contactor feedback – a signal from discharging contactor feedback loop;
83 +** Insulation status – a signal from an insulation monitoring device;
84 +** Charge request – a request to close the charging contactor;
85 +** Precharge request – a request to close the precharging contactor;
86 +** Discharge request – a request to close the discharging contactor;
87 +** PCH contactor feedback – a signal from precharging contactor feedback loop;
88 +** CH/DCH contactor feedback – a signal from charging/discharging contactor feedback loop;
89 +** Main contactor feedback – a signal from main contactor feedback loop;
90 +** Interlock – a signal from interlock loop;
91 +** Fuse 1, Fuse 2, Fuse 3 – signals from fuses;
92 +** Circuit breaker status – status of protection disconnector;
93 +** Balancing request – a request to balance the cells;
94 +** Close Main contactor – a request to close the main contactor.
75 75  * Internal signals – device internal signals:
76 76  ** Low SOC – a signal indicating the discharged battery;
77 77  ** High charging current;
1735228916836-719.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +116.6 KB
Content