Changes for page 3.4 Protections

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -692,6 +692,28 @@
692	692	If there is the “Contactor feedback” error, the **“Critical error” **is generated and **all relays open.**
693	693	)))
694	694
	695	+=== Precharge ===
	696	+
	697	+BMS Main 3 device detects errors while pre-charging the load capacity by monitoring the current and voltage difference before and after contactors. To change the pre-charge monitoring parameters, select the "Protections → Precharge" section:
	698	+
	699	+[[image:1733328487097-648.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="99" width="800"]]
	700	+
	701	+In this section:
	702	+
	703	+* Enable – a flag to enable the protection;
	704	+* Delay before setting the error, millisecond;
	705	+* Delay before clearing the error, second;
	706	+* Lock – a flag to block the error until the device is restarted.
	707	+
	708	+As a result of the protection algorithms the “Precharge error” is generated. Error generation conditions:
	709	+
	710	+* precharging process cannot be finished (the precharge current does not decrease or voltages before and after contactors are not equal) during the “Delay before setting the error” time.
	711	+
	712	+(% class="box infomessage" %)
	713	+(((
	714	+If there is the “Precharge error”, **charging **and **discharging **contactors open.
	715	+)))
	716	+
695	695	=== Insulation ===
696	696
697	697	The BMS Main 3 device can detect a physical signal or CAN bus message from an external insulation monitoring device (such as Bender IR155, iso165C, BMD IMD) to monitor the insulation quality.
...	...	@@ -783,7 +783,7 @@
783	783	If there is the “Critical error”, **all **contactors open.
784	784	)))
785	785
786		-=== General error ===
	808	+=== ​​​​​​​General error ===
787	787
788	788	To change the general error parameters, select the "Protections → Critical error" section:
789	789