Skip to Content

Changes for page 3.4 Protections

Last modified by Admin on 2026/04/01 08:42
From version 51.3
edited by Admin
on 2026/04/01 08:29
Change comment: There is no comment for this version
To version 26.87
edited by Admin
on 2025/02/24 15:33
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -4,7 +4,7 @@
4 4  (% data-numbered-headings-start="4" style="--numbered-headings-start: 3;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
5 5  == Protections ==
6 6  
7 -The BMS Main 3 / BMS Main 2R device continuously monitors the state of the cells, the external environment and, when detecting abnormalities, protects the battery and system components from damage.
7 +The BMS Main 3 device continuously monitors the state of the cells, the external environment and, when detecting abnormalities, protects the battery and system components from damage.
8 8  
9 9  (% class="box errormessage" %)
10 10  (((
... ... @@ -14,7 +14,7 @@
14 14  
15 15  === Overcurrent ===
16 16  
17 -The BMS Main 3 / BMS Main 2R device performs the overcurrent protection depending on current sensor values.
17 +The BMS Main 3 device performs the overcurrent protection depending on current sensor values.
18 18  
19 19  To change the overcurrent protection of the battery, select the "Protections → Overcurrent" section:
20 20  
... ... @@ -22,14 +22,14 @@
22 22  
23 23  In this section:
24 24  
25 -* **Enable **– a flag to enable the protection;
26 -* **Maximum charging current**, А;
27 -* **Tolerant charging current**, А;
28 -* **Maximum discharging current**, А;
29 -* **Tolerant discharging current**, А;
30 -* **Delay before setting the error**, millisecond;
31 -* **Delay before clearing the error**, second;
32 -* **Lock **– a flag to block the error until the device is restarted.
25 +* Enable – a flag to enable the protection;
26 +* Maximum charging current, А;
27 +* Tolerant charging current, А;
28 +* Maximum discharging current, А;
29 +* Tolerant discharging current, А;
30 +* Delay before setting the error, millisecond;
31 +* Delay before clearing the error, second;
32 +* Lock – a flag to block the error until the device is restarted.
33 33  
34 34  As a result of operation of the overcurrent protection, the "Overcurrent" error is generated.
35 35  
... ... @@ -45,7 +45,7 @@
45 45  
46 46  === Charge current limit ===
47 47  
48 -The BMS Main 3 / BMS Main 2R device can check if the charging current exceeds the estimated limit based on the [[Charge map>>doc:Battery management systems.BMS Main 3.3\. Configuration.3\.3 Control.WebHome||anchor="HChargemap"]]. If current exceeds the calculated limit more than configured difference, "Current limit" error is generated.
48 +The BMS Main 3 device can check if the charging current exceeds the estimated limit based on the [[Charge map>>doc:Battery management systems.BMS Main 3.3\. Configuration.3\.3 Control.WebHome||anchor="HChargemap"]]. If current exceeds the calculated limit more than configured difference, "Current limit" error is generated.
49 49  
50 50  Current difference is separated to two regions by the threshold value. Maximum current in Region 1 is calculated by the absolute difference, in Region 2 – by the relative difference.
51 51  
... ... @@ -53,17 +53,17 @@
53 53  
54 54  [[image:1735225207687-430.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="113" width="800"]]In this section:
55 55  
56 -* **Enable **– a flag to enable the protection;
57 -* **Threshold to switch from Region 1 to Region 2** – a current value at which current excess calculation will be switched from absolute to relative difference, A;
58 -* **Region 1: Current difference** – a value of maximum absolute current difference, A;
59 -* **Region 2: Current difference** – a value of maximum relative current excess, A;
60 -* **Delay before setting the error**, millisecond;
61 -* **Delay before clearing the error**, second;
62 -* **Lock **– a flag to block the error until the device is restarted.
56 +* Enable – a flag to enable the protection;
57 +* Threshold to switch from Region 1 to Region 2 – a current value at which current excess calculation will be switched from absolute to relative difference, A;
58 +* Region 1: Current difference – a value of maximum absolute current diffr, A;
59 +* Region 2: Current difference – a value of maximum relative current excess, A;
60 +* Delay before setting the error, millisecond;
61 +* Delay before clearing the error, second;
62 +* Lock – a flag to block the error until the device is restarted.
63 63  
64 64  === Discharge current limit ===
65 65  
66 -The BMS Main 3 / BMS Main 2R device can check if the discharging current exceeds the estimated limit based on the [[Discharge map>>doc:Battery management systems.BMS Main 3.3\. Configuration.3\.3 Control.WebHome||anchor="HDischargemap"]]. If current exceeds the calculated limit more than configured difference, "Current limit" error is generated.
66 +The BMS Main 3 device can check if the discharging current exceeds the estimated limit based on the [[Discharge map>>doc:Battery management systems.BMS Main 3.3\. Configuration.3\.3 Control.WebHome||anchor="HDischargemap"]]. If current exceeds the calculated limit more than configured difference, "Current limit" error is generated.
67 67  
68 68  Current difference is separated to two regions by the threshold value. Maximum current in Region 1 is calculated by the absolute difference, in Region 2 – by the relative difference.
69 69  
... ... @@ -73,17 +73,17 @@
73 73  
74 74  In this section:
75 75  
76 -* **Enable **– a flag to enable the protection;
77 -* **Threshold to switch from Region 1 to Region 2** – a current value at which current excess calculation will be switched from absolute to relative difference, A;
78 -* **Region 1: Current difference** – a value of maximum absolute current difference, A;
79 -* **Region 2: Current difference** – a value of maximum relative current excess, A;
80 -* **Delay before setting the error**, millisecond;
81 -* **Delay before clearing the error**, second;
82 -* **Lock **– a flag to block the error until the device is restarted.
76 +* Enable – a flag to enable the protection;
77 +* Threshold to switch from Region 1 to Region 2 – a current value at which current excess calculation will be switched from absolute to relative difference, A;
78 +* Region 1: Current difference – a value of maximum absolute current diffr, A;
79 +* Region 2: Current difference – a value of maximum relative current excess, A;
80 +* Delay before setting the error, millisecond;
81 +* Delay before clearing the error, second;
82 +* Lock – a flag to block the error until the device is restarted.
83 83  
84 84  === Undervoltage ===
85 85  
86 -The BMS Main 3 / BMS Main 2R device implements battery protection from too low voltage on the cells.
86 +The BMS Main 3 device implements battery protection from too low voltage on the cells.
87 87  
88 88  To change the battery protection parameters from low voltage on the cells, select the "Protections → Undervoltage" section:
89 89  
... ... @@ -91,13 +91,13 @@
91 91  
92 92  In this section:
93 93  
94 -* **Enable **– a flag to enable the protection;
95 -* **Minimum cell voltage**, V;
96 -* **Tolerant cell voltage**, V;
97 -* **Check the open circuit voltage instead of the actual voltage** – a flag to use the U,,ocv,, (corrected due to current and cell resistance) cell voltage;
98 -* **Delay before setting the error**, millisecond;
99 -* **Delay before clearing the error**, second;
100 -* **Lock **– a flag to block the error until the device is restarted.
94 +* Enable – a flag to enable the protection;
95 +* Minimum cell voltage, V;
96 +* Tolerant cell voltage, V;
97 +* Check the open circuit voltage instead of the actual voltage – a flag to enable the check of voltage correction due to current and cell resistance;
98 +* Delay before setting the error, millisecond;
99 +* Delay before clearing the error, second;
100 +* Lock – a flag to block the error until the device is restarted.
101 101  
102 102  As a result of the operation of battery protection from low voltage, the "Undervoltage" error is generated.
103 103  
... ... @@ -111,7 +111,7 @@
111 111  
112 112  === Overvoltage ===
113 113  
114 -The BMS Main 3 / BMS Main 2R device implements battery protection from too high voltage on the cells.
114 +The BMS Main 3 device implements battery protection from too high voltage on the cells.
115 115  
116 116  To change the battery protection parameters from high voltage on the cells, select the "Protections → Overvoltage" section:
117 117  
... ... @@ -119,13 +119,13 @@
119 119  
120 120  In this section:
121 121  
122 -* **Enable **– a flag to enable the protection;
123 -* **Maximum cell voltage**, V;
124 -* **Tolerant cell voltage**, V;
125 -* **Check the open circuit voltage instead of the actual voltage** – a flag to use the U,,ocv,, (corrected due to current and cell resistance) cell voltage;
126 -* **Delay before setting the error**, millisecond;
127 -* **Delay before clearing the error**, second;
128 -* **Lock **– a flag to block the error until the device is restarted.
122 +* Enable – a flag to enable the protection;
123 +* Maximum cell voltage, V;
124 +* Tolerant cell voltage, V;
125 +* Check the open circuit voltage instead of the actual voltage – a flag to enable the check of voltage correction due to current and cell resistance;
126 +* Delay before setting the error, millisecond;
127 +* Delay before clearing the error, second;
128 +* Lock – a flag to block the error until the device is restarted.
129 129  
130 130  As a result of the operation of the battery protection from high voltage, the "Overvoltage" error is generated.
131 131  
... ... @@ -137,34 +137,9 @@
137 137  
138 138  * the maximum voltage among all cells of the battery is less than the “Tolerant cell voltage” value for the “Delay before clearing the error” time.
139 139  
140 -=== Cell imbalance ===
141 -
142 -The BMS Main 3 / BMS Main 2R device implements battery protection from too much cell imbalance. If balancing algorithm is not enough to compensate battery imbalance, then imbalance protection generates an error when imbalance is above estimated threshold.
143 -
144 -To change the battery protection parameters from cell imbalance, select the "Protections → Cell imbalance" section:
145 -
146 -[[image:1760437465709-702.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="133" width="800"]]In this section:
147 -
148 -* **Enable **– a flag to enable the protection;
149 -* **Maximum cell imbalance**, V;
150 -* **Tolerant cell imbalance**, V;
151 -* **Delay before setting the error**, millisecond;
152 -* **Delay before clearing the error**, second;
153 -* **Lock **– a flag to block the error until the device is restarted.
154 -
155 -As a result of the operation of the battery protection from cell imbalance, the "Cell imbalance” error is generated.
156 -
157 -Error generation conditions:
158 -
159 -* the voltage difference between the most charged cell and the least charged cell is more than the “Maximum cell imbalance” value for the “Delay before setting the error” time.
160 -
161 -Conditions for removing the error:
162 -
163 -* the voltage difference between the most charged cell and the least charged cell is less than the “Tolerant cell imbalance” value for the “Delay before clearing the error” time.
164 -
165 165  === Low temperature ===
166 166  
167 -The BMS Main 3 / BMS Main 2R device implements battery protection from too low temperature.
142 +The BMS Main 3 device implements battery protection from too low temperature.
168 168  
169 169  To change the battery protection parameters from low temperature, select the "Protections → Low temperature" section:
170 170  
... ... @@ -172,12 +172,12 @@
172 172  
173 173  In this section:
174 174  
175 -* **Enable **– a flag to enable the protection;
176 -* **Minimum charge temperature**, °C;
177 -* **Tolerant charge temperature**, °C;
178 -* **Minimum discharge temperature**, °C;
179 -* **Tolerant discharge temperature**, °C;
180 -* **Delay before setting the error**, millisecond;
150 +* Enable – a flag to enable the protection;
151 +* Minimum charge temperature, °C;
152 +* Tolerant charge temperature, °C;
153 +* Minimum discharge temperature, °C;
154 +* Tolerant discharge temperature, °C;
155 +* Delay before setting the error, millisecond;
181 181  * Delay before clearing the error, second;
182 182  * Lock – a flag to block the error until the device is restarted.
183 183  
... ... @@ -193,7 +193,7 @@
193 193  
194 194  === High temperature ===
195 195  
196 -The BMS Main 3 / BMS Main 2R device implements battery protection from too high temperature.
171 +The BMS Main 3 device implements battery protection from too high temperature.
197 197  
198 198  To change the battery protection parameters from high temperature, select the "Protections → High temperature" section:
199 199  
... ... @@ -250,7 +250,7 @@
250 250  
251 251  === High humidity ===
252 252  
253 -The BMS Main 3 / BMS Main 2R can detect that the battery is operating in high humidity conditions.
228 +The BMS Main 3 can detect that the battery is operating in high humidity conditions.
254 254  
255 255  To change the detection parameters, select the "Protections → High humidity" section:
256 256  
... ... @@ -282,7 +282,7 @@
282 282  
283 283  === Water ===
284 284  
285 -The BMS Main 3 / BMS Main 2R can protect the battery from working in very high humidity conditions.
260 +The BMS Main 3 can protect the battery from working in very high humidity conditions.
286 286  
287 287  To change the protection parameters, select the "Protections → Water" section:
288 288  
... ... @@ -346,14 +346,11 @@
346 346  
347 347  To change the protection parameters from loss of communication with BMS Logic devices, select the "Protections → Logic offline" section:
348 348  
349 -[[image:1755871522789-489.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="102" width="800"]]
324 +[[image:1733328399416-818.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="86" width="800"]]
350 350  
351 -
352 352  In this section:
353 353  
354 354  * Enable – a flag to enable the protection;
355 -* Delay before setting the error, second;
356 -* Delay before clearing the error, second;
357 357  * Lock – lock the error until the device is reset.
358 358  
359 359  As a result of the protection from loss of communication with BMS Logic devices, the "Logic offline" error is generated.
... ... @@ -400,40 +400,11 @@
400 400  If there is the "Cell count error", the **“Critical error” **is generated**.**
401 401  )))
402 402  
403 -=== Temperature sensor count ===
404 -
405 -To change the protection parameters from the mismatch of the number of temperature sensors to the set value, select the "Protections → Temperature sensor count" section:
406 -
407 -[[image:1755871582533-550.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="123" width="800"]]
408 -
409 -In this section:
410 -
411 -* Enable – a flag to enable the protection;
412 -* Number of cells – a number of temperature sensors connected to the BMS;
413 -* Delay before setting the error, millisecond;
414 -* Delay before clearing the error, second;
415 -* Lock – a flag to block the error until the device is restarted.
416 -
417 -As a result of the operation of the protection from the mismatch of the number of cells, the "T-sensor count error" is generated.
418 -
419 -Error generation conditions:
420 -
421 -* the number of temperature sensors connected to the BMS is **not equal** to the “Number of temperature sensors” value during the “Delay before setting the error” time.
422 -
423 -Conditions for removing the error:
424 -
425 -* the number of temperature sensors connected to the BMS is **equal** to the “Number of temperature sensors” value during the “Delay before clearing the error” time.
426 -
427 -(% class="box warningmessage" %)
428 -(((
429 -If there is the "T-sensor count error", the **“Critical error” **is generated**.**
430 -)))
431 -
432 432  === Logic count ===
433 433  
434 434  To change the protection parameters from the mismatch of the number of BMS Logic devices to the set value, select the "Protections → Logic count” section:
435 435  
436 -[[image:1762425434368-516.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="125" width="800"]]
379 +[[image:1733328415732-163.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="110" width="800"]]
437 437  
438 438  In this section:
439 439  
... ... @@ -440,8 +440,6 @@
440 440  * Enable – a flag to enable the protection;
441 441  * Logic count – a number of BMS Logic devices connected to the BMS Main;
442 442  * Scan fast – a flag to scan BMS Logic devices fast (devices with addresses from 1 to “Logic count” are scanned; this mode reduces BMS system startup time);
443 -* Delay before setting the error – a delay before setting the error //during initialization//, millisecond;
444 -* Delay before clearing the error– a delay before clearing the error //during initialization//, second;
445 445  * Lock – lock the error until the device is reset.
446 446  
447 447  As a result of the operation of the protection from the mismatch of the number of BMS Logic devices, the "Logic count error" is generated.
... ... @@ -448,13 +448,11 @@
448 448  
449 449  Error generation conditions:
450 450  
451 -* during the initialization BMS Main 3 / BMS Main 2R have not found required number of BMS Logic devices during the "Delay before setting the error" time;
452 -* after the initialization the number of BMS Logic devices connected to the BMS Main is **not equal** to the “Logic count” value.
392 +* the number of BMS Logic devices connected to the BMS Main is **not equal** to the “Logic count” value.
453 453  
454 454  Conditions for removing the error:
455 455  
456 -* during the initialization BMS Main 3 / BMS Main 2R have found required number of BMS Logic devices and the "Delay before setting the error" time has passed;
457 -* after the initialization the number of BMS Logic devices connected to the BMS Main is **equal** to the “Logic count” value.
396 +* the number of BMS Logic devices connected to the BMS Main is **equal** to the “Logic count” value.
458 458  
459 459  (% class="box warningmessage" %)
460 460  (((
... ... @@ -463,7 +463,7 @@
463 463  
464 464  === Short circuit ===
465 465  
466 -The BMS Main 3 / BMS Main 2R device implements the protection of power circuits (contactors, power wires) against overheating caused by the flow of high current for a long time.
405 +The BMS Main 3 device implements the protection of power circuits (contactors, power wires) against overheating caused by the flow of high current for a long time.
467 467  
468 468  To change the protection parameters from short circuit, select the "Protections → Short circuit" section:
469 469  
... ... @@ -490,7 +490,7 @@
490 490  
491 491  === High contactor temperature ===
492 492  
493 -The BMS Main 3 / BMS Main 2R device protects power contactors from overheating. To measure the temperature of the contactor, one of the thermistors connected to the X5 connector is used.
432 +The BMS Main 3 device protects power contactors from overheating. To measure the temperature of the contactor, one of the thermistors connected to the X5 connector is used.
494 494  
495 495  To change the overheating protection parameters of power contactors, select the "Protections → High contactor temperature" section:
496 496  
... ... @@ -518,7 +518,7 @@
518 518  
519 519  === Current sensor ===
520 520  
521 -The BMS Main 3 / BMS Main 2R device checks the current sensor connection circuits. The circuits are checked for breakage and short-circuit to the +5 V supply line.
460 +The BMS Main 3 device checks the current sensor connection circuits. The circuits are checked for breakage and short-circuit to the +5 V supply line.
522 522  
523 523  To change the test parameters of the current sensor connection circuits, select the "Protections → Current sensor" section:
524 524  
... ... @@ -552,7 +552,7 @@
552 552  
553 553  === Power switch ===
554 554  
555 -BMS Main 3 / BMS Main 2R device checks the status of power switches that are used to control the contactors. To change the parameters of the power switch protection, select the "Protections → Power switch" section:
494 +BMS Main 3 device checks the status of power switches that are used to control the contactors. To change the parameters of the power switch protection, select the "Protections → Power switch" section:
556 556  
557 557  [[image:1733328461554-241.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="99" width="800"]]
558 558  
... ... @@ -570,7 +570,7 @@
570 570  
571 571  === Power fault ===
572 572  
573 -BMS Main 3 / BMS Main 2R device checks the status of CAN2, CAN3, RS-485-2 and Current sensors power supply.
512 +BMS Main 3 device checks the status of CAN2, CAN3, RS-485-2 and Current sensors power supply.
574 574  
575 575  (% class="box infomessage" %)
576 576  (((
... ... @@ -600,7 +600,7 @@
600 600  
601 601  === Charge contactor cycles ===
602 602  
603 -The BMS Main 3 / BMS Main 2R device protects the charging contactor against frequent switching.
542 +The BMS Main 3 device protects the charging contactor against frequent switching.
604 604  
605 605  To change the protection parameters against high frequency switching of the charging contactor, select the "Protections → Charge contactor cycles" section:
606 606  
... ... @@ -627,7 +627,7 @@
627 627  
628 628  === Discharge contactor cycles ===
629 629  
630 -The BMS Main 3 / BMS Main 2R device protects the discharging contactor against frequent switching.
569 +The BMS Main 3 device protects the discharging contactor against frequent switching.
631 631  
632 632  To change the protection parameters against high frequency switching of the discharging contactor, select the "Protections → Discharging contactor cycles" section:
633 633  
... ... @@ -654,7 +654,7 @@
654 654  
655 655  === Temperature sensors ===
656 656  
657 -The BMS Main 3 / BMS Main 2R device checks the temperature sensors connection circuits. The circuits are checked for breakage and short-circuit.
596 +The BMS Main 3 device checks the temperature sensors connection circuits. The circuits are checked for breakage and short-circuit.
658 658  
659 659  To change the protection parameters of the temperature sensors circuits, select the "Protections → Temperature sensors" section:
660 660  
... ... @@ -724,7 +724,7 @@
724 724  
725 725  === Stuck contactor ===
726 726  
727 -The BMS Main 3 / BMS Main 2R device protects contactors against sticking.
666 +The BMS Main 3 device protects contactors against sticking.
728 728  
729 729  To change the protection parameters against sticking, select the "Protections → Stuck contactor" section:
730 730  
... ... @@ -750,7 +750,7 @@
750 750  
751 751  === Contactor feedback ===
752 752  
753 -The BMS Main 3 / BMS Main 2R device can receive feedback signals from contactors and detect discrepancy between the control value and the feedback signal. To enable specific contactor protection, the feedback signal must be connected to the corresponding contactor feedback pin on the X3 header.
692 +The BMS Main 3 device can receive feedback signals from contactors and detect discrepancy between the control value and the feedback signal. To enable specific contactor protection, the feedback signal must be connected to the corresponding contactor feedback pin on the X3 header.
754 754  
755 755  To change the contactor feedback check parameters, select the "Protections → Contactor feedback" section:
756 756  
... ... @@ -774,7 +774,7 @@
774 774  
775 775  === Insulation ===
776 776  
777 -The BMS Main 3 / BMS Main 2R device can detect a physical signal or CAN bus message from an external insulation monitoring device (such as Bender IR155, iso165C, BMD IMD) to monitor the insulation quality.
716 +The BMS Main 3 device can detect a physical signal or CAN bus message from an external insulation monitoring device (such as Bender IR155, iso165C, BMD IMD) to monitor the insulation quality.
778 778  
779 779  To change the insulation monitoring parameters, select the "Protections → Insulation" section:
780 780  
... ... @@ -800,7 +800,7 @@
800 800  
801 801  === HVIL ===
802 802  
803 -The BMS Main 3 / BMS Main 2R allows to control the high voltage interlock loop by applying current to a testing loop and monitoring the difference between the measured current and the required value.
742 +The BMS Main 3 allows to control the high voltage interlock loop by applying current to a testing loop and monitoring the difference between the measured current and the required value.
804 804  
805 805  To change the HVIL measurement parameters, select the "Protections → HVIL" section:
806 806  
... ... @@ -824,37 +824,6 @@
824 824  If there is the “HVIL error”, the **“Critical error”** is generated.
825 825  )))
826 826  
827 -=== Battery voltage ===
828 -
829 -The BMS Main 3 / BMS Main 2R allows to control the difference between sum of all cell voltages and voltage measured before the contactors.
830 -
831 -To change the voltage difference check parameters, select the "Protections → Battery voltage" section:
832 -
833 -[[image:1755871661259-633.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="100" width="800"]]
834 -
835 -In this section:
836 -
837 -* Enable – a flag to enable the protection;
838 -* Abnormal voltage difference – a maximum difference between sum of all cell voltages and voltage measured before the contactors (High voltage 1), V;
839 -* Delay before setting the error, second;
840 -* Delay before clearing the error, second;
841 -* Lock – a flag to block the error until the device is restarted.
842 -
843 -If there is a mismatch between voltages, "Battery voltage mismatch" error is generated.
844 -
845 -Error generation conditions:
846 -
847 -* difference between sum of all cell voltages and voltage measured before the contactors is **more **than "Abnormal voltage difference" value during "Delay before setting the error" time.
848 -
849 -Conditions for removing the error:
850 -
851 -* difference between sum of all cell voltages and voltage measured before the contactors is **less **than "Abnormal voltage difference" value during "Delay before clearing the error" time.
852 -
853 -(% class="box warningmessage" %)
854 -(((
855 -If there is the “Battery voltage mismatch” error, the **“Critical error”** is generated.
856 -)))
857 -
858 858  === Critical error ===
859 859  
860 860  Some of the errors are system critical. A separate signal named "Critical error" indicates a BMS fault.
... ... @@ -861,7 +861,7 @@
861 861  
862 862  To change the critical error parameters, select the "Protections → Critical error" section:
863 863  
864 -[[image:1762775547945-129.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="117" width="800"]]
772 +[[image:1733328487100-898.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="101" width="800"]]
865 865  
866 866  In this section:
867 867  
... ... @@ -868,10 +868,9 @@
868 868  * Enable – a flag to enable the protection;
869 869  * Delay before setting the error, millisecond;
870 870  * Delay before clearing the error, second;
871 -* Errors 1, 2 to to ignore when setting the critical error;
872 872  * Lock – a flag to block the error until the device is restarted.
873 873  
874 -The "Critical error" signal is generated if at least one of the critical errors (see [[Errors>>doc:Battery management systems.Additional information.1\. Battery controllers\: signals and errors.WebHome||anchor="HErrors"]]) is generated during the “Delay before setting the error” time.
781 +The "Critical error" signal is generated if at least one of the critical errors (see [[Errors>>doc:Battery management systems.Additional information.1\. Battery controllers\: signals and errors.WebHome||anchor="HErrors"]]) is generated during the “Delay before setting the error” time:
875 875  
876 876  The “Critical error" signal is cleared if there are no errors from the list above during the “Delay before clearing the error” time.
877 877  
... ... @@ -889,7 +889,7 @@
889 889  * Lock – a flag to block the error until the device is restarted;
890 890  * Errors 1, 2 to set the "Critical error" – bitfields to enable check of corresponding errors.
891 891  
892 -The “General error”is generated if at least one of the enabled errors is generated during the “Delay before setting the error” time.
799 +The general error flag is generated if at least one of the enabled errors is generated during the “Delay before setting the error” time.
893 893  
894 894  The “General error” is cleared if there are no errors from the enabled errors during the “Delay before clearing the error” time.
895 895  
1755870412909-992.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -20.5 KB
Content
1755870732669-803.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -17.2 KB
Content
1755871195329-366.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -16.0 KB
Content
1755871522789-489.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -16.0 KB
Content
1755871582533-550.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -17.2 KB
Content
1755871661259-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -20.5 KB
Content
1760434646517-885.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -21.4 KB
Content
1760436309214-414.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
1760437465709-702.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -19.4 KB
Content
1762425390154-843.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -19.8 KB
Content
1762425434368-516.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -19.8 KB
Content
1762775508522-157.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -19.9 KB
Content
1762775547945-129.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -21.4 KB
Content