Skip to Content

Changes for page 3.4 Protections

Last modified by Admin on 2025/10/14 10:27
From version 42.3
edited by Admin
on 2025/10/14 10:23
Change comment: There is no comment for this version
To version 43.2
edited by Admin
on 2025/10/14 10:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -139,10 +139,33 @@
139 139  
140 140  === Cell imbalance ===
141 141  
142 -The BMS Main 3 device implements battery protection from too much cell imbalance. If balancing algorithm is not enough to compensate battery imbalance, then imbalance protection generates an error
142 +The BMS Main 3 device implements battery protection from too much cell imbalance. If balancing algorithm is not enough to compensate battery imbalance, then imbalance protection generates an error when imbalance is above estimated threshold.
143 143  
144 -To change the battery protection parameters from low temperature, select the "Protections → Low temperature" section:
144 +To change the battery protection parameters from cell imbalance, select the "Protections → Cell imbalance" section:
145 145  
146 +[[image:1760437465709-702.png]]
147 +
148 +In this section:
149 +
150 +* Enable – a flag to enable the protection;
151 +* Minimum charge temperature, °C;
152 +* Tolerant charge temperature, °C;
153 +* Minimum discharge temperature, °C;
154 +* Tolerant discharge temperature, °C;
155 +* Delay before setting the error, millisecond;
156 +* Delay before clearing the error, second;
157 +* Lock – a flag to block the error until the device is restarted.
158 +
159 +As a result of the operation of the battery protection from low temperature, the "Low temperature (CH)" and/or “Low temperature (DCH)” error are generated.
160 +
161 +Error generation conditions:
162 +
163 +* the minimum temperature among all cells of the battery is less than the “Minimum charging (discharging) temperature” value for the “Delay before setting the error” time.
164 +
165 +Conditions for removing the error:
166 +
167 +* the minimum temperature among all cells of the battery is greater than the “Tolerant charging (discharging) temperature” value for the “Delay before clearing the error” time.
168 +
146 146  === Low temperature ===
147 147  
148 148  The BMS Main 3 device implements battery protection from too low temperature.
1760437465709-702.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +19.4 KB
Content