Changes for page 3.4 Protections

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -772,10 +772,33 @@
772	772	* Delay before clearing the error, second;
773	773	* Lock – a flag to block the error until the device is restarted.
774	774
775		-The "Critical error" flag is generated if at least one of the critical errors (see [[Battery controllers: signals and errors>>doc:Battery management systems.Additional information.1\. Battery controllers\: signals and errors.WebHome||anchor="HErrors"]]) is generated during the “Delay before setting the error” time:
	775	+The critical error flag is generated if at least one of the following errors is generated during the “Delay before setting the error” time:
776	776
777		-The “Critical error” flag is cleared if there are no errors from the list above during the “Delay before clearing the error” time.
	777	+* “Battery cover error”;
	778	+* “Water”;
	779	+* “Logic offline”;
	780	+* “Cell count error”;
	781	+* “ADC error”;
	782	+* “Current sensor error”;
	783	+* “Shunt offline”;
	784	+* “Shunt error”;
	785	+* “WDT reset”
	786	+* “No temp. sensors”;
	787	+* “Temperature sensor shorted”;
	788	+* “Stuck contactor”;
	789	+* “CH contactor feedback error”;
	790	+* “DCH contactor feedback error”;
	791	+* “Insulation fault”;
	792	+* “PCH contactor feedback error”;
	793	+* “CH/DCH contactor feedback error”;
	794	+* “Main contactor feedback error”;
	795	+* “High voltage fault”;
	796	+* “Power switch error”;
	797	+* “HVIL error”;
	798	+* “Power fault”.
778	778
	800	+The “Critical error” is cleared if there are no errors from the list above during the “Delay before clearing the error” time.
	801	+
779	779	=== General error ===
780	780
781	781	To change the general error parameters, select the "Protections → Critical error" section: