Changes for page 3.4 Protections

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -772,33 +772,10 @@
772	772	* Delay before clearing the error, second;
773	773	* Lock – a flag to block the error until the device is restarted.
774	774
775		-The critical error flag is generated if at least one of the following errors is generated during the “Delay before setting the error” time:
	775	+The "Critical error" flag is generated if at least one of the critical errors (see [[Battery controllers: signals and errors>>doc:Battery management systems.Additional information.1\. Battery controllers\: signals and errors.WebHome||anchor="HErrors"]]) is generated during the “Delay before setting the error” time:
776	776
777		-* “Battery cover error”;
778		-* “Water”;
779		-* “Logic offline”;
780		-* “Cell count error”;
781		-* “ADC error”;
782		-* “Current sensor error”;
783		-* “Shunt offline”;
784		-* “Shunt error”;
785		-* “WDT reset”
786		-* “No temp. sensors”;
787		-* “Temperature sensor shorted”;
788		-* “Stuck contactor”;
789		-* “CH contactor feedback error”;
790		-* “DCH contactor feedback error”;
791		-* “Insulation fault”;
792		-* “PCH contactor feedback error”;
793		-* “CH/DCH contactor feedback error”;
794		-* “Main contactor feedback error”;
795		-* “High voltage fault”;
796		-* “Power switch error”;
797		-* “HVIL error”;
798		-* “Power fault”.
	777	+The “Critical error” flag is cleared if there are no errors from the list above during the “Delay before clearing the error” time.
799	799
800		-The “Critical error” is cleared if there are no errors from the list above during the “Delay before clearing the error” time.
801		-
802	802	=== General error ===
803	803
804	804	To change the general error parameters, select the "Protections → Critical error" section: