Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 18.1
edited by Admin
on 2025/03/03 13:06
Change comment: There is no comment for this version
To version 18.2
edited by Admin
on 2025/03/03 13:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,8 +7,8 @@
7 7  
8 8  Updating the BMS Main 2.x firmware can be done in the following ways:
9 9  
10 -* using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus;
11 -* using the device web interface via Ethernet or Wi-Fi.
10 +* via ElectricDeviceMonitor by Ethernet, CAN or RS-485 bus;
11 +* via web interface by Ethernet or Wi-Fi.
12 12  
13 13  == Updating via ElectricDeviceMonitor ==
14 14  
... ... @@ -15,8 +15,10 @@
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 2.x.
18 +*
18 18  * USB/CAN adapter (for updating via CAN bus).
19 19  * USB/RS-485 adapter (for updating via RS-485 bus).
21 +* SD-card installed on BMS Main 2.1 for update via configuration interface;
20 20  * Firmware file in .srec (Motorola S-record) format.
21 21  
22 22  Firmware updating includes two steps: