Skip to Content

1. General information

Version 13.1 by Admin on 2024/11/13 16:42

This document describes configuration procedure of BMS Main 2.x board. Configuring can be done using the web interface available via Ethernet or Wi-Fi.

Default connection settings for Ethernet are:

  • IP address – 192.168.0.100
  • Network Mask – 255.255.0.0
  • Default gateway – 192.168.0.1

Note
To connect via Ethernet, the computer`s network adapter through which the BMS Main 2.x is configured must be in the same subnet as the target board.

To connect via Wi-Fi use the IP address which an access point gave to the board (see Wi-Fi for configuring the connection and the “System → Overview” section to find out the IP address).

Default credentials for changing board settings using the web interface are:

  • Login – user
  • Password – bms 

To access the web interface, enter the IP address of the board (192.168.0.100 by default) in the address bar of the browser.