Skip to Content

Changes for page BMS LANmodule

Last modified by Admin on 2025/05/12 11:26
From version 5.1
edited by Admin
on 2024/12/13 14:36
Change comment: There is no comment for this version
To version 1.1
edited by Admin
on 2024/12/13 14:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,8 +1,10 @@
1 1  = General information =
2 2  
3 +
4 +
3 3  [[image:1734099407734-687.png||data-xwiki-image-style-alignment="center" height="167" width="300"]]
4 4  
5 -BMS LANmodule is an extension module that can be inserted to the BMS Mini, BMS Mini S, BMS Main 3, BMS Main X, or BMS Main 3X controller. It allows a BMS controller to be configured over an Ethernet network.
7 +BMS LANmodule is an extension module that can be inserted to the BMS Mini, BMS Mini S, BMS Main 3, or BMS Main X controller. It allows a BMS controller to be configured over an Ethernet network.
6 6  
7 7  (% id="cke_bm_4104S" style="display:none" %) (%%)Overall architecture of a battery system that is controlled by an upper-level system via Ethernet is shown below.
8 8  
... ... @@ -28,7 +28,7 @@
28 28  Connecting the BMS LANmodule 1.x is performed to the powered-off BMS controller!
29 29  )))
30 30  
31 -The BMS LANmodule must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
33 +The BMS LANmodule 1.x must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
32 32  
33 33  Here is the example of BMS Wi-Fi header on BMS Main X:
34 34  
... ... @@ -37,7 +37,7 @@
37 37  = Configuration =
38 38  
39 39  
40 -Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings are in the “Connectivity -> LAN” section of the settings.
42 +Configuration of the BMS LANmodule 1.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings are in the “Connectivity -> LAN” section of the settings.
41 41  
42 42  (% class="box warningmessage" %)
43 43  (((