Skip to Content

Changes for page BMS LANmodule

Last modified by Admin on 2025/05/12 11:26
From version 4.1
edited by Admin
on 2024/12/13 14:29
Change comment: There is no comment for this version
To version 9.2
edited by Admin
on 2024/12/13 16:01
Change comment: Update document after refactoring.

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.WebHome
1 +Battery management systems.WebHome
Content
... ... @@ -28,9 +28,9 @@
28 28  Connecting the BMS LANmodule 1.x is performed to the powered-off BMS controller!
29 29  )))
30 30  
31 -The BMS LANmodule 1.x must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
31 +The BMS LANmodule must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
32 32  
33 -Here is the example of BMS Wi-Fi header on BMS Main X:
33 +Here is the example of header for additional devices on BMS Main X:
34 34  
35 35  [[image:1734099661846-836.png||data-xwiki-image-style-alignment="center" height="423" width="450"]]
36 36  
... ... @@ -37,8 +37,10 @@
37 37  = Configuration =
38 38  
39 39  
40 -Configuration of the BMS LANmodule 1.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings are in the “Connectivity -> LAN” section of the settings.
40 +Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]].
41 41  
42 +Typically, the connection settings located in the “Connectivity -> LAN” section of the settings.
43 +
42 42  (% class="box warningmessage" %)
43 43  (((
44 44  To apply new connection settings, it is necessary to restart the BMS controller.