Changes for page BMS LANmodule

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -25,21 +25,20 @@
25	25	(% class="box warningmessage" %)
26	26	(((
27	27	**Attention!**
28		-Connecting the BMS LANmodule 1.x is performed to the powered-off BMS controller!
	28	+Connecting the BMS LANmodule is performed to the powered-off BMS controller!
29	29	)))
30	30
31		-The BMS LANmodule 1.x must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
	31	+The BMS LANmodule must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
32	32
33		-Here is the example of BMS Wi-Fi header on BMS Main X:
	33	+Here is the example of header for additional devices on BMS Main X:
34	34
35	35	[[image:1734099661846-836.png||data-xwiki-image-style-alignment="center" height="423" width="450"]]
36	36
37	37	= Configuration =
38	38
	39	+Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings located in the “Connectivity -> LAN” section of the settings.
39	39
40		-Configuration of the BMS LANmodule 1.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings are in the “Connectivity -> LAN” section of the settings.
41		-
42		-(% class="box warningmessage" %)
	41	+(% class="box infomessage" %)
43	43	(((
44	44	To apply new connection settings, it is necessary to restart the BMS controller.
45	45	)))