Skip to Content

Changes for page BMS LANmodule

Last modified by Admin on 2025/05/12 11:26
From version 3.1
edited by Admin
on 2024/12/13 14:29
Change comment: There is no comment for this version
To version 16.1
edited by Admin
on 2025/05/12 11:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,7 +2,7 @@
2 2  
3 3  [[image:1734099407734-687.png||data-xwiki-image-style-alignment="center" height="167" width="300"]]
4 4  
5 -BMS LANmodule is an extension module that can be inserted to the BMS Mini, BMS Mini S, BMS Main 3, BMS Main 3X, or BMS Main X controller. It allows a BMS controller to be configured over an Ethernet network.
5 +BMS LANmodule is an extension module that can be inserted to the BMS Mini, BMS Mini S, BMS Main 3, BMS Main X, or BMS Main 3X controller. It allows a BMS controller to be configured over an Ethernet network.
6 6  
7 7  (% id="cke_bm_4104S" style="display:none" %) (%%)Overall architecture of a battery system that is controlled by an upper-level system via Ethernet is shown below.
8 8  
... ... @@ -15,7 +15,7 @@
15 15  |Current consumption, mA, max|200
16 16  |Network speed, Mbps|10/100
17 17  |Dimensions (length × width × height), mm|44 × 42 × 24
18 -|Weight, g|14 ± 2
18 +|Weight, g|14 ± 5
19 19  |(% colspan="2" %)**Operating conditions**
20 20  |Operating temperature range, ° С|-40 to +85
21 21  |Degree of protection from external influences|IP00
... ... @@ -25,21 +25,21 @@
25 25  (% class="box warningmessage" %)
26 26  (((
27 27  **Attention!**
28 -Connecting the BMS LANmodule 1.x is performed to the powered-off BMS controller!
28 +Connecting the BMS LANmodule is performed to the powered-off BMS controller!
29 +To prevent the damage of device avoid electrostatic discharges.
29 29  )))
30 30  
31 -The BMS LANmodule 1.x must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
32 +The BMS LANmodule must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
32 32  
33 -Here is the example of BMS Wi-Fi header on BMS Main X:
34 +Here is the example of header for additional devices on BMS Main X:
34 34  
35 35  [[image:1734099661846-836.png||data-xwiki-image-style-alignment="center" height="423" width="450"]]
36 36  
37 37  = Configuration =
38 38  
40 +Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings located in the “Connectivity -> LAN” section of the settings.
39 39  
40 -Configuration of the BMS LANmodule 1.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings are in the “Connectivity -> LAN” section of the settings.
41 -
42 -(% class="box warningmessage" %)
42 +(% class="box infomessage" %)
43 43  (((
44 44  To apply new connection settings, it is necessary to restart the BMS controller.
45 45  )))
1737045696448-626.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +10.3 KB
Content