Skip to Content

Changes for page BMS LANmodule

Last modified by Admin on 2025/05/12 11:26
From version 13.1
edited by Admin
on 2025/01/16 16:40
Change comment: There is no comment for this version
To version 9.3
edited by Admin
on 2025/01/16 16:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.WebHome
1 +Battery management systems.WebHome
Content
... ... @@ -1,9 +1,11 @@
1 -= General information =
1 += Общая информация =
2 2  
3 3  [[image:1734099407734-687.png||data-xwiki-image-style-alignment="center" height="167" width="300"]]
4 4  
5 -BMS LANmodule is an extension module that can be inserted to the BMS Mini, BMS Mini S, BMS Main 3, BMS Main X, or BMS Main 3X controller. It allows a BMS controller to be configured over an Ethernet network.
5 +BMS LANmodule представляет собой модуль расширения, который устанавливается в контроллеры BMS Mini, BMS Mini S, BMS Main X, BMS Main 3 или BMS Main 3X. Он позволяет настраивать BMS через сеть Ethernet.
6 6  
7 +Устройство не содержит функций шифрования и криптографии, а также не содержит батареек/аккумуляторов.
8 +
7 7  (% id="cke_bm_4104S" style="display:none" %) (%%)Overall architecture of a battery system that is controlled by an upper-level system via Ethernet is shown below.
8 8  
9 9  [[image:1734099501895-554.png||data-xwiki-image-style-alignment="center" height="344" width="450"]]
... ... @@ -10,15 +10,15 @@
10 10  
11 11  = Specifications =
12 12  
13 -|**Parameter**|**Value**
14 -|Supply voltage, V|5.0 ± 0.5
15 -|Current consumption, mA, max|200
16 -|Network speed, Mbps|10/100
17 -|Dimensions (length × width × height), mm|44 × 42 × 24
18 -|Weight, g|14 ± 2
19 -|(% colspan="2" %)**Operating conditions**
20 -|Operating temperature range, ° С|-40 to +85
21 -|Degree of protection from external influences|IP00
15 +|**Параметр**|**Значение**
16 +|Напряжение питания, В|5,0 ± 0,5
17 +|Потребляемый ток, мА, не более|200
18 +|Скорость подключения, Мбит/с|10/100
19 +|Габариты (длина × ширина × высота), мм|44 × 42 × 24
20 +|Масса, г|14 ± 2
21 +|(% colspan="2" %)**Условия эксплуатации**
22 +|Диапазон рабочих температур, °С|от -40 до +85
23 +|Степень защиты от внешних воздействий|IP00
22 22  
23 23  = Connection procedure =
24 24  
... ... @@ -25,7 +25,7 @@
25 25  (% class="box warningmessage" %)
26 26  (((
27 27  **Attention!**
28 -Connecting the BMS LANmodule is performed to the powered-off BMS controller!
30 +Connecting the BMS LANmodule 1.x is performed to the powered-off BMS controller!
29 29  )))
30 30  
31 31  The BMS LANmodule must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
... ... @@ -36,9 +36,12 @@
36 36  
37 37  = Configuration =
38 38  
39 -Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings located in the “Connectivity -> LAN” section of the settings.
40 40  
41 -(% class="box infomessage" %)
42 +Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]].
43 +
44 +Typically, the connection settings located in the “Connectivity -> LAN” section of the settings.
45 +
46 +(% class="box warningmessage" %)
42 42  (((
43 43  To apply new connection settings, it is necessary to restart the BMS controller.
44 44  )))