Skip to Content

Changes for page BMS LANmodule

Last modified by Admin on 2025/05/12 11:26
From version 1.1
edited by Admin
on 2024/12/13 14:24
Change comment: There is no comment for this version
To version 9.3
edited by Admin
on 2025/01/16 16:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.WebHome
1 +Battery management systems.WebHome
Content
... ... @@ -1,11 +1,11 @@
1 -= General information =
1 += Общая информация =
2 2  
3 -
4 -
5 5  [[image:1734099407734-687.png||data-xwiki-image-style-alignment="center" height="167" width="300"]]
6 6  
7 -BMS LANmodule is an extension module that can be inserted to the BMS Mini, BMS Mini S, BMS Main 3, or BMS Main X controller. It allows a BMS controller to be configured over an Ethernet network.
5 +BMS LANmodule представляет собой модуль расширения, который устанавливается в контроллеры BMS Mini, BMS Mini S, BMS Main X, BMS Main 3 или BMS Main 3X. Он позволяет настраивать BMS через сеть Ethernet.
8 8  
7 +Устройство не содержит функций шифрования и криптографии, а также не содержит батареек/аккумуляторов.
8 +
9 9  (% id="cke_bm_4104S" style="display:none" %) (%%)Overall architecture of a battery system that is controlled by an upper-level system via Ethernet is shown below.
10 10  
11 11  [[image:1734099501895-554.png||data-xwiki-image-style-alignment="center" height="344" width="450"]]
... ... @@ -12,15 +12,15 @@
12 12  
13 13  = Specifications =
14 14  
15 -|**Parameter**|**Value**
16 -|Supply voltage, V|5.0 ± 0.5
17 -|Current consumption, mA, max|200
18 -|Network speed, Mbps|10/100
19 -|Dimensions (length × width × height), mm|44 × 42 × 24
20 -|Weight, g|14 ± 2
21 -|(% colspan="2" %)**Operating conditions**
22 -|Operating temperature range, ° С|-40 to +85
23 -|Degree of protection from external influences|IP00
15 +|**Параметр**|**Значение**
16 +|Напряжение питания, В|5,0 ± 0,5
17 +|Потребляемый ток, мА, не более|200
18 +|Скорость подключения, Мбит/с|10/100
19 +|Габариты (длина × ширина × высота), мм|44 × 42 × 24
20 +|Масса, г|14 ± 2
21 +|(% colspan="2" %)**Условия эксплуатации**
22 +|Диапазон рабочих температур, °С|от -40 до +85
23 +|Степень защиты от внешних воздействий|IP00
24 24  
25 25  = Connection procedure =
26 26  
... ... @@ -30,9 +30,9 @@
30 30  Connecting the BMS LANmodule 1.x is performed to the powered-off BMS controller!
31 31  )))
32 32  
33 -The BMS LANmodule 1.x must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
33 +The BMS LANmodule must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws.
34 34  
35 -Here is the example of BMS Wi-Fi header on BMS Main X:
35 +Here is the example of header for additional devices on BMS Main X:
36 36  
37 37  [[image:1734099661846-836.png||data-xwiki-image-style-alignment="center" height="423" width="450"]]
38 38  
... ... @@ -39,8 +39,10 @@
39 39  = Configuration =
40 40  
41 41  
42 -Configuration of the BMS LANmodule 1.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. Typically, the connection settings are in the “Connectivity -> LAN” section of the settings.
42 +Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]].
43 43  
44 +Typically, the connection settings located in the “Connectivity -> LAN” section of the settings.
45 +
44 44  (% class="box warningmessage" %)
45 45  (((
46 46  To apply new connection settings, it is necessary to restart the BMS controller.