Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 2.2
edited by Admin
on 2025/02/28 10:35
Change comment: There is no comment for this version
To version 4.3
edited by Admin
on 2025/02/28 10:38
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,7 +16,7 @@
16 16  
17 17  Follow the steps below:
18 18  
19 -~1. Connect the BMS Display to the BMS USB-CAN.
19 +~1. Connect the BMS Display to the USB-CAN ada.
20 20  
21 21  2. Move switches of the BMS USB-CAN to the following positions:
22 22  
... ... @@ -45,12 +45,10 @@
45 45  
46 46  **10. Boot the device to go into the bootloader mode.**
47 47  
48 -**10b.** For the **BMS Logic 12 v3.4 and newer** or **BMS Logic 18 v3.3 and newer** do the following steps:
48 +* In the ElectricDeviceMonitor, select the menu “Tasks – Monitor - BMS Display 1.x”:
49 49  
50 -* In the ElectricDeviceMonitor, select the menu “Tasks – Monitor - BMS Logic 12/18 3.x”:
50 +[[image:1740739041707-667.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="295" width="300"]]
51 51  
52 -[[image:1733156153292-595.png||data-xwiki-image-style-alignment="center" height="320" width="296"]]
53 -
54 54  * Set the following connection settings and click the “Launch” button:
55 55  ** serial port name of the BMS USB-RS485
56 56  ** baud rate and data format: 115200 kbps, 8 bits, no parity, 1 stop bit
1740739018136-732.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +33.1 KB
Content
1740739041707-667.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +33.2 KB
Content