Changes for page 4. Indication

Last modified by Admin on 2025/02/27 15:48

From 7.2 to 7.3 From 7.5 to 8.1

From version 7.3

edited by Admin
on 2025/02/27 15:37

Change comment: There is no comment for this version

To version 7.5

edited by Admin
on 2025/02/27 15:39

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -59,46 +59,8 @@
  If the number of errors is greater than three, a list of errors will be output page by page. Turning pages will be performed automatically every 2 seconds. It is also available changing pages manually using the button on the device or an external button connected to the P6 header.
--Errors shortnames and codes are in the table below.
++Errors short names and abbreviations for BMS Main 2.1, BMS Mini, BMS Mini S and BMS Main 3 are shown [[here>>doc:Battery management systems.Additional information.1\. Battery controllers\: signals and errors.WebHome||anchor="HErrors"]].
--|**Error code**|**Error name**|**Description**
--|ACK|Need ACK|Acknowledge of errors is needed
--|ADC|ADC error|Wrong values from the ADC
--|BC|Battery cover|Battery cover is opened
--|CCC|CH cont. cycle|Charge contactor switches too frequency
--|CCF|CH cont. feed.|Wrong feedback signal from the charging contactor
--|CEL|Cell count|Wrong number of cells
--|CER|Critical error|Critical error
--|CHT|Cont. hi. temp.|Hight temperature of a contactor
--|COM|Combilift offl.|No connection with the Combilift forklift
--|CRO|Crown error|Crown forklift error
--|CSE|Current sensor|Current sensor is shorted or opened
--|DCC|DCH cont. cycle|Discharge contactor switches too frequency
--|DCF|DCH cont. feed.|Wrong feedback signal from the discharging contactor
--|FSE|FS error|Filesystem on an SD card is corrupted
--|HCT|High CH temp.|Battery temperature is too high for charging
--|HDT|High DCH temp.|Battery temperature is too high for discharging
--|HH|High humidity|High humidity
--|HYG|HYG offline|No connection with the HYG forklift
--|LCT|Low CH temp.|Battery temperature is too low for charging
--|LDT|Low DCH temp.|Battery temperature is too low for discharging
--|LHT|Logic hi. temp.|Temperature of a BMS Logic board is too high
--|LOF|Logic offline|No connection with a BMS Logic board
--|LOG|Logic count|Wrong number of BMS Logic boards
--|MNT|Mount error|SD card is not mounted
--|NTS|No temp. sens.|No temperature sensors connected to a BMS Logic
--|OC|Overcurrent|High current
--|OV|Overvoltage|High voltage
--|SET|Settings error|Checksum of settings is wrong
--|SHC|Short circuit|Short circuit
--|SHE|Shunt error|Internal error of the shunt sensor
--|SHO|Shunt offline|No connection with the shunt sensor
--|SPI|Spirit offline|No connection with the Spirit truck
--|STC|Stuck contactor|Contactor is stuck
--|TSS|Shorted temp.|A temperature sensor connected to a BMS Logic is shorted
--|UCH|Unallowable CH|Charging the battery through the discharging circuit
--|UV|Undervoltage|Low voltage
--|WA|Water|Water in the battery
--|WDT|WDT reset|Watchdog timer reset the BMS
++Errors short names and abbreviations for BMS Main X and BMS Main 3X are shown [[here>>doc:Battery management systems.Additional information.2\. Strings controllers\: signals and errors.WebHome||anchor="HErrors"]].

Changes for page 4. Indication

Summary

Details

Applications

Navigation

Table of Contents