Changes for page 1. Battery controllers: signals and errors
Last modified by Admin on 2025/03/03 15:20
Summary
-
Page properties (2 modified, 0 added, 0 removed)
Details
- Page properties
-
- Title
-
... ... @@ -1,1 +1,1 @@ 1 - 3.1 General information1 +Battery controllers: signals, states and errors - Content
-
... ... @@ -1,76 +4,142 @@ 1 -(% data-numbered-headings-start="3" style="--numbered-headings-start: 2;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %) 2 -= Configuration = 3 - 4 4 (% data-numbered-headings-start="1" style="--numbered-headings-start: 0;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %) 5 -= =Generalinformation ==2 += Signals, states and errors = 6 6 7 -== =Connection ===4 +== Input signals == 8 8 9 - Configuring can bedoneusingtheElectricDeviceMonitorabovethe1.18.0 (availablebythe[[link>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) via6 +Below is the list of input signals that can be assigned to discrete inputs of the BMS controller. 10 10 11 -* USB; 12 -* CAN bus (Systec, PEAK, Marathon and USB-CAN adapters are supported); 13 -* TCP connection (BMS Wi-Fi or BMS LANmodule must be installed on BMS Main 3). 8 +* **Remote control values**: Off = 0, On = 1, Use physical input = 2-65535. 9 +* **Status values**: Off = 0, On = 1. 14 14 15 -After connecting device to the PC, launch ElectricDeviceMonitor, select "Unified monitor" in the main program window: 11 +(% style="width:1553px" %) 12 +|=(% colspan="1" rowspan="2" style="width: 197px;" %)**Name**|=(% colspan="1" rowspan="2" style="width: 409px;" %)**Description**|=(% colspan="3" rowspan="1" style="width: 251px;" %)**Compatibility**|=(% colspan="2" rowspan="1" style="width: 170px;" %)BMS Display|=(% colspan="2" rowspan="1" style="width: 213px;" %)Remote control|=(% colspan="2" rowspan="1" style="width: 282px;" %)Status 13 +|=(% style="width: 96px;" %)**Mini S / Mini**|=(% style="width: 83px;" %)**Main 2.1**|=(% style="width: 71px;" %)**Main 3**|=(% colspan="1" style="width: 125px;" %)Short name|=(% style="width: 45px;" %)Abbr.|=(% colspan="1" style="width: 132px;" %)**CANopen SDO**|=(% colspan="1" style="width: 81px;" %)**Modbus**|=(% style="width: 159px;" %)**CANopen SDO**|=(% style="width: 123px;" %)**Modbus** 14 +|(% style="width:197px" %)Balancing request|(% style="width:409px" %)Request to balance the cells|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Balancing req.|(% style="width:45px" %)BR|(% style="width:132px" %)0x5100, sub 0x14|(% style="width:81px" %)0x5113|(% style="width:159px" %)0x4000 sub 0x00, bit 3|(% style="width:123px" %)0x2000, bit 3 15 +|(% style="width:197px" %)Battery cover|(% style="width:409px" %)Signal from the battery cover|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Battery cover|(% style="width:45px" %)CVR|(% style="width:132px" %)0x5100, sub 0x01|(% style="width:81px" %)0x5100|(% style="width:159px" %)0x4000 sub 0x00, bit 0|(% style="width:123px" %)0x2000, bit 0 16 +|(% style="width:197px" %)CH contactor feedback|(% style="width:409px" %)Signal from the charging contactor feedback loop|(% style="width:96px" %)Yes*|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)CH cont. feed.|(% style="width:45px" %)CCF|(% style="width:132px" %)0x5100, sub 0x06|(% style="width:81px" %)0x5105|(% style="width:159px" %)0x4000 sub 0x00, bit 5|(% style="width:123px" %)0x2000, bit 5 17 +|(% style="width:197px" %)CH/DCH contactor feedback|(% style="width:409px" %)Signal from the charging/discharging contactor feedback loop|(% style="width:96px" %)Yes*|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)C/D cont. feed.|(% style="width:45px" %)CDF|(% style="width:132px" %)0x5100, sub 0x0D|(% style="width:81px" %)0x510C|(% style="width:159px" %)0x4000 sub 0x00, bit 12|(% style="width:123px" %)0x2000, bit 12 18 +|(% style="width:197px" %)Charge request|(% style="width:409px" %)Request to close the charging contactor|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Charge request|(% style="width:45px" %)CRE|(% style="width:132px" %)0x5100, sub 0x09|(% style="width:81px" %)0x5108|(% style="width:159px" %)0x4000 sub 0x00, bit 8|(% style="width:123px" %)0x2000, bit 8 19 +|(% style="width:197px" %)Charger connected|(% style="width:409px" %)Signal indicating that the charger is connected|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Charger connect.|(% style="width:45px" %)CON|(% style="width:132px" %)0x5100, sub 0x02|(% style="width:81px" %)0x5101|(% style="width:159px" %)0x4000 sub 0x00, bit 1|(% style="width:123px" %)0x2000, bit 1 20 +|(% style="width:197px" %)Circuit breaker status|(% style="width:409px" %)Status of protective disconnector|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Circuit breaker|(% style="width:45px" %)CBS|(% style="width:132px" %)0x5100, sub 0x13|(% style="width:81px" %)0x5112|(% style="width:159px" %)0x4001 sub 0x00, bit 2|(% style="width:123px" %)0x20F4, bit 2 21 +|(% style="width:197px" %)Close External 1|(% style="width:409px" %)Request to set the External 1 signal|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Close Ext.1|(% style="width:45px" %)CE1|(% style="width:132px" %)0x5100, sub 0x16|(% style="width:81px" %)0x5115|(% style="width:159px" %)0x4001 sub 0x00, bit 5|(% style="width:123px" %)0x20F4, bit 5 22 +|(% style="width:197px" %)Close Main contactor|(% style="width:409px" %)Request to close the main contactor|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Close Main cont.|(% style="width:45px" %)CMC|(% style="width:132px" %)0x5100, sub 0x15|(% style="width:81px" %)0x5114|(% style="width:159px" %)0x4001 sub 0x00, bit 4|(% style="width:123px" %)0x20F4, bit 4 23 +|(% style="width:197px" %)DCH contactor feedback|(% style="width:409px" %)Signal from the discharging contactor feedback loop|(% style="width:96px" %)Yes*|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)DCH cont. feed.|(% style="width:45px" %)DCF|(% style="width:132px" %)0x5100, sub 0x07|(% style="width:81px" %)0x5106|(% style="width:159px" %)0x4000 sub 0x00, bit 6|(% style="width:123px" %)0x2000, bit 6 24 +|(% style="width:197px" %)Discharge request|(% style="width:409px" %)Request to close the discharging contactor|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Discharge req.|(% style="width:45px" %)DRE|(% style="width:132px" %)0x5100, sub 0x0B|(% style="width:81px" %)0x510A|(% style="width:159px" %)0x4000 sub 0x00, bit 10|(% style="width:123px" %)0x2000, bit 10 25 +|(% style="width:197px" %)Fuse 1|(% style="width:409px" %)Signal from fuse 1|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Fuse 1|(% style="width:45px" %)F1|(% style="width:132px" %)0x5100, sub 0x10|(% style="width:81px" %)0x510F|(% style="width:159px" %)0x4000 sub 0x00, bit 15|(% style="width:123px" %)0x2000, bit 15 26 +|(% style="width:197px" %)Fuse 2|(% style="width:409px" %)Signal from fuse 2|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Fuse 2|(% style="width:45px" %)F2|(% style="width:132px" %)0x5100, sub 0x11|(% style="width:81px" %)0x5110|(% style="width:159px" %)0x4001 sub 0x00, bit 0|(% style="width:123px" %)0x20F4, bit 0 27 +|(% style="width:197px" %)Fuse 3|(% style="width:409px" %)Signal from fuse 3|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Fuse 3|(% style="width:45px" %)F3|(% style="width:132px" %)0x5100, sub 0x12|(% style="width:81px" %)0x5111|(% style="width:159px" %)0x4001 sub 0x00, bit 1|(% style="width:123px" %)0x20F4, bit 1 28 +|(% style="width:197px" %)Inhibit charging|(% style="width:409px" %)Command to open the charging contactor|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Inhibit charg.|(% style="width:45px" %)ICH|(% style="width:132px" %)0x5100, sub 0x04|(% style="width:81px" %)0x5103|(% style="width:159px" %)0x4000 sub 0x00, bit 3|(% style="width:123px" %)0x2000, bit 3 29 +|(% style="width:197px" %)Inhibit discharging|(% style="width:409px" %)Command to open the discharging contactor|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Inhibit disch.|(% style="width:45px" %)IDC|(% style="width:132px" %)0x5100, sub 0x05|(% style="width:81px" %)0x5104|(% style="width:159px" %)0x4000 sub 0x00, bit 4|(% style="width:123px" %)0x2000, bit 4 30 +|(% style="width:197px" %)Insulation status|(% style="width:409px" %)Signal from an insulation monitoring device|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Insul. status|(% style="width:45px" %)INS|(% style="width:132px" %)0x5100, sub 0x08|(% style="width:81px" %)0x5107|(% style="width:159px" %)0x4000 sub 0x00, bit 7|(% style="width:123px" %)0x2000, bit 7 31 +|(% style="width:197px" %)Interlock|(% style="width:409px" %)Signal from the interlock loop|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Interlock|(% style="width:45px" %)INT|(% style="width:132px" %)0x5100, sub 0x0F|(% style="width:81px" %)0x510E|(% style="width:159px" %)0x4000 sub 0x00, bit 14|(% style="width:123px" %)0x2000, bit 14 32 +|(% style="width:197px" %)Main contactor feedback|(% style="width:409px" %)Signal from the main contactor feedback loop|(% style="width:96px" %)Yes*|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Main cont. feed.|(% style="width:45px" %)MCF|(% style="width:132px" %)0x5100, sub 0x0E|(% style="width:81px" %)0x510D|(% style="width:159px" %)0x4000 sub 0x00, bit 13|(% style="width:123px" %)0x2000, bit 13 33 +|(% style="width:197px" %)PCH contactor feedback|(% style="width:409px" %)Signal from the precharging contactor feedback loop|(% style="width:96px" %)Yes*|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)PCH cont. feed.|(% style="width:45px" %)PCF|(% style="width:132px" %)0x5100, sub 0x0C|(% style="width:81px" %)0x510B|(% style="width:159px" %)0x4000 sub 0x00, bit 11|(% style="width:123px" %)0x2000, bit 11 34 +|(% style="width:197px" %)Power up/down request|(% style="width:409px" %)Request to power down the device|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Power down req.|(% style="width:45px" %)PDN|(% style="width:132px" %)0x5100, sub 0x03|(% style="width:81px" %)0x5102|(% style="width:159px" %)0x4000 sub 0x00, bit 2|(% style="width:123px" %)0x2000, bit 2 35 +|(% style="width:197px" %)Precharge request|(% style="width:409px" %)Request to close the precharging contactor|(% style="width:96px" %)Yes|(% style="width:83px" %)Yes|(% style="width:71px" %)Yes|(% style="width:125px" %)Precharge req.|(% style="width:45px" %)PRE|(% style="width:132px" %)0x5100, sub 0x0A|(% style="width:81px" %)0x5109|(% style="width:159px" %)0x4000 sub 0x00, bit 9|(% style="width:123px" %)0x2000, bit 9 16 16 17 -[[image:Battery management systems.BMS Main 3.3\. Configuration.3\.1 General information.WebHome@1735233230234-960.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="340" width="450"]] 37 +(% class="wikigeneratedid" %) 38 +~* Contactor feedback signals in BMS Mini / BMS Mini S are connected to [[X1 header>>doc:Battery management systems.BMS Mini S.2\. Installation and connection.WebHome||anchor="HHeaders"]] and configured in "Signals → MOSFETs → Contactors feedback" section. 18 18 19 - Choosethe connection typeandset up connectionettings:40 +== Internal signals == 20 20 21 - *Serialport(USB):choose thecorresponding COM port;42 +Below is the list of internal BMS signals. Most signals can be assigned to discrete outputs and/or relays. 22 22 23 - [[image:Batterymanagement systems.BMSMain 3.3\. Configuration.3\.1 General information.WebHome@1733320484262-545.png||data-xwiki-image-style-alignment="center" height="311" width="450"]][[image:Batterymanagement systems.BMS Main 3.3\. Configuration.3\.1Generalinformation.WebHome@1733320484267-118.png||data-xwiki-image-style-alignment="center"height="248"width="450"]]44 +* **Status values**: Off = 0, On = 1. 24 24 25 -* Systec USB-CAN, PEAK USB-CAN, Marathon USB-CAN, BMS USB-CAN: select the device in device list, specify the CAN speed and BMS device address: 46 +(% style="width:1378px" %) 47 +|=(% colspan="1" rowspan="2" style="width: 205px;" %)**Name**|=(% colspan="1" rowspan="2" style="width: 419px;" %)**Description**|=(% colspan="3" rowspan="1" style="width: 238px;" %)**Compatibility**|=(% colspan="2" rowspan="1" style="width: 170px;" %)BMS Display|=(% colspan="2" rowspan="1" style="width: 344px;" %)Status 48 +|=(% style="width: 91px;" %)**Mini S / Mini**|=(% style="width: 78px;" %)**Main 2.1**|=(% style="width: 69px;" %)**Main 3**|=(% colspan="1" style="width: 120px;" %)Short name|=(% style="width: 50px;" %)Abbr.|=(% colspan="1" style="width: 179px;" %)**CANopen SDO**|=(% colspan="1" style="width: 166px;" %)**Modbus** 49 +|(% style="width:205px" %)Allow charging|(% style="width:419px" %)Command for a charger to start charging|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Allow charging|(% style="width:50px" %)ACH|(% style="width:179px" %)0x4030 sub 0x00, bit 3|(% style="width:166px" %)0x2009-0x200A, bit 3 50 +|(% style="width:205px" %)Balancing 1|(% style="width:419px" %)Command to balance the first series of cells|(% style="width:91px" %) |(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Balancing 1|(% style="width:50px" %)BA1|(% style="width:179px" %)0x4030 sub 0x00, bit 15|(% style="width:166px" %)0x2009-0x200A, bit 15 51 +|(% style="width:205px" %)Balancing 2|(% style="width:419px" %)Command to balance the second series of cells|(% style="width:91px" %) |(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Balancing 2|(% style="width:50px" %)BA2|(% style="width:179px" %)0x4030 sub 0x00, bit 16|(% style="width:166px" %)0x2009-0x200A, bit 16 52 +|(% style="width:205px" %)Cell analysis|(% style="width:419px" %)Signal indicating cell analysis process|(% style="width:91px" %)Yes*|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes*|(% style="width:120px" %)Cell analysis|(% style="width:50px" %)CEA|(% style="width:179px" %)0x4030 sub 0x00, bit 14|(% style="width:166px" %)0x2009-0x200A, bit 14 53 +|(% style="width:205px" %)Charging current present|(% style="width:419px" %)Signal showing the presence of the charging current|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes|(% style="width:120px" %)CH curr. present|(% style="width:50px" %)CCP|(% style="width:179px" %)0x4030 sub 0x00, bit 4|(% style="width:166px" %)0x2009-0x200A, bit 4 54 +|(% style="width:205px" %)Charging|(% style="width:419px" %)Command to control the charging contactor|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Charging|(% style="width:50px" %)CH|(% style="width:179px" %)0x4030 sub 0x00, bit 2|(% style="width:166px" %)0x2009-0x200A, bit 2 55 +|(% style="width:205px" %)Charging/Discharging|(% style="width:419px" %)Command to control the charging/discharging contactor|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Charg./Discharg.|(% style="width:50px" %)C/D|(% style="width:179px" %)0x4030 sub 0x00, bit 22|(% style="width:166px" %)0x2009-0x200A, bit 22 56 +|(% style="width:205px" %)Cooler|(% style="width:419px" %)Command to control the cooler|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Cooler|(% style="width:50px" %)COO|(% style="width:179px" %)0x4030 sub 0x00, bit 9|(% style="width:166px" %)0x2009-0x200A, bit 9 57 +|(% style="width:205px" %)Crown EWS|(% style="width:419px" %) |(% style="width:91px" %)Yes*|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes*|(% style="width:120px" %)Crown EWS|(% style="width:50px" %)EWS|(% style="width:179px" %)0x4030 sub 0x00, bit 19|(% style="width:166px" %)0x2009-0x200A, bit 19 58 +|(% style="width:205px" %)Discharging (AUX)|(% style="width:419px" %)Command to control the auxiliary discharging contactor|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Disch. AUX|(% style="width:50px" %)AUX|(% style="width:179px" %)0x4030 sub 0x00, bit 17|(% style="width:166px" %)0x2009-0x200A, bit 17 59 +|(% style="width:205px" %)Discharging current present|(% style="width:419px" %)Signal showing the presence of the discharging current|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes|(% style="width:120px" %)DCH cur. present|(% style="width:50px" %)DCP|(% style="width:179px" %)0x4030 sub 0x00, bit 6|(% style="width:166px" %)0x2009-0x200A, bit 6 60 +|(% style="width:205px" %)Discharging|(% style="width:419px" %)Command to control the discharging contactor|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Discharging|(% style="width:50px" %)DCH|(% style="width:179px" %)0x4030 sub 0x00, bit 5|(% style="width:166px" %)0x2009-0x200A, bit 5 61 +|(% style="width:205px" %)External 1|(% style="width:419px" %)Command to control an external scheme|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)External 1|(% style="width:50px" %)EX1|(% style="width:179px" %)0x4030 sub 0x00, bit 26|(% style="width:166px" %)0x2009-0x200A, bit 26 62 +|(% style="width:205px" %)Heater (AUX)|(% style="width:419px" %)Command to control the auxiliary heater|(% style="width:91px" %) |(% style="width:78px" %)Yes|(% style="width:69px" %) |(% style="width:120px" %)Heater (AUX)|(% style="width:50px" %)HAU|(% style="width:179px" %)0x4030 sub 0x00, bit 27|(% style="width:166px" %)0x2009-0x200A, bit 27 63 +|(% style="width:205px" %)Heater|(% style="width:419px" %)Command to control the heater|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Heater|(% style="width:50px" %)HEA|(% style="width:179px" %)0x4030 sub 0x00, bit 8|(% style="width:166px" %)0x2009-0x200A, bit 8 64 +|(% style="width:205px" %)High charging current|(% style="width:419px" %)Signal indicating that the charging current is high|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)High ch. curr.|(% style="width:50px" %)HCC|(% style="width:179px" %)0x4030 sub 0x00, bit 1|(% style="width:166px" %)0x2009-0x200A, bit 1 65 +|(% style="width:205px" %)Init|(% style="width:419px" %)Signal showing that the device is in the initialization phase|(% style="width:91px" %)Yes*|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes*|(% style="width:120px" %)Init|(% style="width:50px" %)INI|(% style="width:179px" %)0x4030 sub 0x00, bit 11|(% style="width:166px" %)0x2009-0x200A, bit 11 66 +|(% style="width:205px" %)Low SOC|(% style="width:419px" %)Signal indicatiing that the battery has low SOC|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Low SOC|(% style="width:50px" %)LOS|(% style="width:179px" %)0x4030 sub 0x00, bit 0|(% style="width:166px" %)0x2009-0x200A, bit 0 67 +|(% style="width:205px" %)Main contactor|(% style="width:419px" %)Command to control the main contactor|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Main contactor|(% style="width:50px" %)MCO|(% style="width:179px" %)0x4030 sub 0x00, bit 20|(% style="width:166px" %)0x2009-0x200A, bit 20 68 +|(% style="width:205px" %)Power down ACK|(% style="width:419px" %)Command that acknowledges the BMS power down. Acknowledgement is outputted when the charge and discharge contactors have been opened on the power down request|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Power down ACK|(% style="width:50px" %)PDA|(% style="width:179px" %)0x4030 sub 0x00, bit 18|(% style="width:166px" %)0x2009-0x200A, bit 18 69 +|(% style="width:205px" %)Power up|(% style="width:419px" %)Signal indicating the BMS power status|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Power up|(% style="width:50px" %)PUP|(% style="width:179px" %)0x4030 sub 0x00, bit 25|(% style="width:166px" %)0x2009-0x200A, bit 25 70 +|(% style="width:205px" %)Precharging|(% style="width:419px" %)Command to control the precharging contactor|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Precharging|(% style="width:50px" %)PCH|(% style="width:179px" %)0x4030 sub 0x00, bit 12|(% style="width:166px" %)0x2009-0x200A, bit 12 71 +|(% style="width:205px" %)Ready to charge|(% style="width:419px" %)Signal showing that the battery is ready for charging|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Ready to charge|(% style="width:50px" %)RTC|(% style="width:179px" %)0x4030 sub 0x00, bit 23|(% style="width:166px" %)0x2009-0x200A, bit 23 72 +|(% style="width:205px" %)Ready to discharge|(% style="width:419px" %)Signal showing that the battery is ready for discharging|(% style="width:91px" %)Yes|(% style="width:78px" %)Yes|(% style="width:69px" %)Yes|(% style="width:120px" %)Ready to disch.|(% style="width:50px" %)RTD|(% style="width:179px" %)0x4030 sub 0x00, bit 24|(% style="width:166px" %)0x2009-0x200A, bit 24 73 +|(% style="width:205px" %)Service reset|(% style="width:419px" %)Command to restart the device|(% style="width:91px" %)Yes*|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes*|(% style="width:120px" %)Service reset|(% style="width:50px" %)SR|(% style="width:179px" %)0x4030 sub 0x00, bit 21|(% style="width:166px" %)0x2009-0x200A, bit 21 74 +|(% style="width:205px" %)Shutdown request (Combilift)|(% style="width:419px" %)Command to open the dischrging contactor from the Combilift truck|(% style="width:91px" %)Yes*|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes*|(% style="width:120px" %)Combilift shutd.|(% style="width:50px" %)CSH|(% style="width:179px" %)0x4030 sub 0x00, bit 13|(% style="width:166px" %)0x2009-0x200A, bit 13 75 +|(% style="width:205px" %)Shutdown request (HYG/Spirit)|(% style="width:419px" %)Command to open the dischrging contactor from the HYG truck|(% style="width:91px" %)Yes*|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes*|(% style="width:120px" %)HYG shutdown|(% style="width:50px" %)HSH|(% style="width:179px" %)0x4030 sub 0x00, bit 10|(% style="width:166px" %)0x2009-0x200A, bit 10 76 +|(% style="width:205px" %)Voltage too high for charging|(% style="width:419px" %)Signal indicating that the battery is fully charged|(% style="width:91px" %)Yes*|(% style="width:78px" %)Yes*|(% style="width:69px" %)Yes*|(% style="width:120px" %)Volt. too high|(% style="width:50px" %)VTH|(% style="width:179px" %)0x4030 sub 0x00, bit 7|(% style="width:166px" %)0x2009-0x200A, bit 7 26 26 27 -[[image:Battery management systems.BMS Main 3.3\. Configuration.3\.1 General information.WebHome@1735233434987-983.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="248" width="450"]] 78 +(% class="wikigeneratedid" %) 79 +~* Cannot be assigned to discrete outputs and relays. 28 28 29 - *TCP connection: set up the device IP address.81 +== Errors == 30 30 31 - [[image:Batterymanagementsystems.BMSMain3.3\. Configuration.3\.1General information.WebHome@1735234302538-838.png||data-xwiki-image-style-alignment="center" height="248" width="450"]]83 +Below is the list of BMS errors. 32 32 33 - Whenconnected, the deviceasks for an access password. Forthe "User"account, thedefaultpasswordis"user"(without quotes).85 +* **Status values**: Off = 0, On = 1. 34 34 35 -[[image:Battery management systems.BMS Main 3.3\. Configuration.3\.1 General information.WebHome@1735053821120-339.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="468" width="600"]] 87 +(% style="width:1533px" %) 88 +|(% colspan="1" rowspan="2" style="width:225px" %)**Name **|(% colspan="1" rowspan="2" style="width:426px" %)**Description**|(% colspan="1" rowspan="2" style="width:77px" %)**Is a critical error?**|(% colspan="3" rowspan="1" style="width:239px" %)**Compatibility**|(% colspan="2" rowspan="1" style="width:177px" %)**BMS Display**|(% colspan="2" rowspan="1" style="width:374px" %)**Status** 89 +|=(% style="width: 93px;" %)**Mini S / Mini**|=(% style="width: 80px;" %)**Main 2.1**|=(% style="width: 66px;" %)**Main 3**|=(% colspan="1" style="width: 137px;" %)Short name|=(% style="width: 40px;" %)Abbr.|(% colspan="1" style="width:184px" %)**CANopen SDO**|(% colspan="1" style="width:190px" %)**Modbus** 90 +|(% style="width:225px" %)ADC error|(% style="width:426px" %)Error of the ADC that measures the battery current|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)ADC error|(% style="width:40px" %)ADC|(% style="width:190px" %)0x4020 sub 0x00, bit 19|(% style="width:190px" %)0x2007-0x2008, bit 19 91 +|(% style="width:225px" %)Battery cover error|(% style="width:426px" %)Battery cover is open|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Battery cover|(% style="width:40px" %)BCE|(% style="width:190px" %)0x4020 sub 0x00, bit 5|(% style="width:190px" %)0x2007-0x2008, bit 5 92 +|(% style="width:225px" %)Cell count error|(% style="width:426px" %)Number of cells does not match the specified value|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Cell count|(% style="width:40px" %)CEL|(% style="width:190px" %)0x4020 sub 0x00, bit 12|(% style="width:190px" %)0x2007-0x2008, bit 12 93 +|(% style="width:225px" %)CH contactor cycles error|(% style="width:426px" %)Switching frequency of the charging contactor is too high|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)CH cont. cycle|(% style="width:40px" %)CCC|(% style="width:190px" %)0x4020 sub 0x00, bit 21|(% style="width:190px" %)0x2007-0x2008, bit 21 94 +|(% style="width:225px" %)CH contactor feedback error|(% style="width:426px" %)The control signal for the charging contactor and the contactor feedback differ|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)CH cont. feed.|(% style="width:40px" %)CCF|(% style="width:190px" %)0x4021 sub 0x00, bit 6|(% style="width:190px" %)0x200E-0x200F, bit 6 95 +|(% style="width:225px" %)CH/DCH contactor feedback error|(% style="width:426px" %)The control signal for the charging/discharging contactor and the contactor feedback differ|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)C/D cont. feed.|(% style="width:40px" %)CDF|(% style="width:190px" %)0x4021 sub 0x00, bit 10|(% style="width:190px" %)0x200E-0x200F, bit 10 96 +|(% style="width:225px" %)Combilift offline|(% style="width:426px" %)Connection with the Combilift forklift is lost|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Combilift offl.|(% style="width:40px" %)COM|(% style="width:190px" %)0x4020 sub 0x00, bit 15|(% style="width:190px" %)0x2007-0x2008, bit 15 97 +|(% style="width:225px" %)Contactor feedback error|(% style="width:426px" %)Failure of one of the contactors feedback signal. Which contactor is failed can be found in "Signals -> MOSFETs -> Contactor feedback" section of the BMS Mini device|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %) |(% style="width:66px" %) |(% style="width:137px" %)Cont. feed. er.|(% style="width:40px" %)CFE|(% style="width:190px" %)0x4021 sub 0x00, bit 12|(% style="width:190px" %)0x200E-0x200F, bit 12 98 +|(% style="width:225px" %)Critical error|(% style="width:426px" %)Critical system error, the BMS is damaged|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Critical error|(% style="width:40px" %)CER|(% style="width:190px" %)0x4020 sub 0x00, bit 10|(% style="width:190px" %)0x2007-0x2008, bit 10 99 +|(% style="width:225px" %)Crown error|(% style="width:426px" %)Connection with the Crown forklift is lost|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Crown error|(% style="width:40px" %)CRO|(% style="width:190px" %)0x4020 sub 0x00, bit 11|(% style="width:190px" %)0x2007-0x2008, bit 11 100 +|(% style="width:225px" %)Current limit error|(% style="width:426px" %)Charging or discharging current is more than the limit calculated by Charge map or Discharge map|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %) |(% style="width:66px" %)Yes|(% style="width:137px" %)Cur. limit error|(% style="width:40px" %)CLE|(% style="width:190px" %)0x4021 sub 0x00, bit 19|(% style="width:190px" %)0x200E-0x200F, bit 19 101 +|(% style="width:225px" %)Current sensor error|(% style="width:426px" %)Error in the current sensor circuit|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Current sensor|(% style="width:40px" %)CSE|(% style="width:190px" %)0x4020 sub 0x00, bit 20|(% style="width:190px" %)0x2007-0x2008, bit 20 102 +|(% style="width:225px" %)DCH contactor cycles error|(% style="width:426px" %)Switching frequency of the discharging contactor is too high|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)DCH cont. cycle|(% style="width:40px" %)DCC|(% style="width:190px" %)0x4020 sub 0x00, bit 22|(% style="width:190px" %)0x2007-0x2008, bit 22 103 +|(% style="width:225px" %)DCH contactor feedback error|(% style="width:426px" %)The control signal for the discharging contactor and the contactor feedback differ|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)DCH cont. feed.|(% style="width:40px" %)DCF|(% style="width:190px" %)0x4021 sub 0x00, bit 7|(% style="width:190px" %)0x200E-0x200F, bit 7 104 +|(% style="width:225px" %)FS error|(% style="width:426px" %)SD card read/write error|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)FS error|(% style="width:40px" %)FSE|(% style="width:190px" %)0x4021 sub 0x00, bit 3|(% style="width:190px" %)0x200E-0x200F, bit 3 105 +|(% style="width:225px" %)General error|(% style="width:426px" %)Special configurable error depending on other errors|(% style="width:77px" %) |(% style="width:93px" %)Yes*|(% style="width:80px" %)Yes*|(% style="width:66px" %)Yes*|(% style="width:137px" %)General error|(% style="width:40px" %)GE|(% style="width:190px" %)0x4021 sub 0x00, bit 13|(% style="width:190px" %)0x200E-0x200F, bit 13 106 +|(% style="width:225px" %)High contactor temperature|(% style="width:426px" %)Temperature of a contactor is too high|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Hi. cont. temp.|(% style="width:40px" %)HCT|(% style="width:190px" %)0x4020 sub 0x00, bit 17|(% style="width:190px" %)0x2007-0x2008, bit 17 107 +|(% style="width:225px" %)High humidity|(% style="width:426px" %)Increased humidity inside the battery|(% style="width:77px" %) |(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)High humidity|(% style="width:40px" %)HHU|(% style="width:190px" %)0x4020 sub 0x00, bit 6|(% style="width:190px" %)0x2007-0x2008, bit 6 108 +|(% style="width:225px" %)High Logic temperature|(% style="width:426px" %)At least one of the Logic devices is overheated|(% style="width:77px" %) |(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Hi. Logic temp.|(% style="width:40px" %)HLT|(% style="width:190px" %)0x4020 sub 0x00, bit 8|(% style="width:190px" %)0x2007-0x2008, bit 8 109 +|(% style="width:225px" %)High temperature (CH)|(% style="width:426px" %)Temperature is too high for charging|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)High temp. CH|(% style="width:40px" %)HTC|(% style="width:190px" %)0x4021 sub 0x00, bit 1|(% style="width:190px" %)0x200E-0x200F, bit 1 110 +|(% style="width:225px" %)High temperature (DCH)|(% style="width:426px" %)Temperature is too high for discharging|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)High temp. DCH|(% style="width:40px" %)HTD|(% style="width:190px" %)0x4020 sub 0x00, bit 4|(% style="width:190px" %)0x2007-0x2008, bit 4 111 +|(% style="width:225px" %)High voltage fault|(% style="width:426px" %)Failure of high voltage measuring circuits|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %) |(% style="width:66px" %)Yes|(% style="width:137px" %)HV fault|(% style="width:40px" %)HVF|(% style="width:190px" %)0x4021 sub 0x00, bit 14|(% style="width:190px" %)0x200E-0x200F, bit 14 112 +|(% style="width:225px" %)HVIL error|(% style="width:426px" %)Breakage of high-voltage interlock current loop|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %) |(% style="width:66px" %)Yes|(% style="width:137px" %)HVIL error|(% style="width:40px" %)HE|(% style="width:190px" %)0x4021 sub 0x00, bit 16|(% style="width:190px" %)0x200E-0x200F, bit 16 113 +|(% style="width:225px" %)HYG offline|(% style="width:426px" %)Connection with the HYG forklift is lost|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)HYG offline|(% style="width:40px" %)HYG|(% style="width:190px" %)0x4020 sub 0x00, bit 13|(% style="width:190px" %)0x2007-0x2008, bit 13 114 +|(% style="width:225px" %)Insulation fault|(% style="width:426px" %)Insulation resistance is too low|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Insulation fault|(% style="width:40px" %)INF|(% style="width:190px" %)0x4021 sub 0x00, bit 8|(% style="width:190px" %)0x200E-0x200F, bit 8 115 +|(% style="width:225px" %)Logic count error|(% style="width:426px" %)The number of BMS Logic devices differs from the required value|(% style="width:77px" %) |(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Logic count|(% style="width:40px" %)LOG|(% style="width:190px" %)0x4020 sub 0x00, bit 18|(% style="width:190px" %)0x2007-0x2008, bit 18 116 +|(% style="width:225px" %)Logic offline (Cell monitor offline)|(% style="width:426px" %)BMS Main devices: at least one of the Logic devices is offline. 117 +BMS Mini devices: connection with cell monitor is lost.|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Logic offline|(% style="width:40px" %)LOF|(% style="width:190px" %)0x4020 sub 0x00, bit 9|(% style="width:190px" %)0x2007-0x2008, bit 9 118 +|(% style="width:225px" %)Low temperature (CH)|(% style="width:426px" %)Temperature is too low for charging;|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Low temp. CH|(% style="width:40px" %)LTC|(% style="width:190px" %)0x200E-0x200F, bit 0|(% style="width:190px" %)0x200E-0x200F, bit 0 119 +|(% style="width:225px" %)Low temperature (DCH)|(% style="width:426px" %)Temperature is too low for discharging;|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Low temp. DCH|(% style="width:40px" %)LTD|(% style="width:190px" %)0x4020 sub 0x00, bit 3|(% style="width:190px" %)0x2007-0x2008, bit 3 120 +|(% style="width:225px" %)Main contactor feedback error|(% style="width:426px" %)The control signal for the main contactor and the contactor feedback differ|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Main cont. feed.|(% style="width:40px" %)MCF|(% style="width:190px" %)0x200E-0x200F, bit 11|(% style="width:190px" %)0x200E-0x200F, bit 11 121 +|(% style="width:225px" %)Mount error|(% style="width:426px" %)SD card cannot be mounted|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Mount error|(% style="width:40px" %)MNT|(% style="width:190px" %)0x200E-0x200F, bit 2|(% style="width:190px" %)0x200E-0x200F, bit 2 122 +|(% style="width:225px" %)Need acknowledge|(% style="width:426px" %)There is an unacknowledged error in error journal|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Need ACK|(% style="width:40px" %)ACK|(% style="width:190px" %)0x4020 sub 0x00, bit 14|(% style="width:190px" %)0x2007-0x2008, bit 14 123 +|(% style="width:225px" %)No temperature sensors|(% style="width:426px" %)The device has no temperature sensors connected|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)No temp. sens.|(% style="width:40px" %)NTS|(% style="width:190px" %)0x4020 sub 0x00, bit 27|(% style="width:190px" %)0x2007-0x2008, bit 27 124 +|(% style="width:225px" %)Overcurrent|(% style="width:426px" %)The battery current is too high|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Overcurrent|(% style="width:40px" %)OC|(% style="width:190px" %)0x4020 sub 0x00, bit 0|(% style="width:190px" %)0x2007-0x2008, bit 0 125 +|(% style="width:225px" %)Overvoltage|(% style="width:426px" %)Voltage of any cell is too high|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Overvoltage|(% style="width:40px" %)OV|(% style="width:190px" %)0x4020 sub 0x00, bit 2|(% style="width:190px" %)0x2007-0x2008, bit 2 126 +|(% style="width:225px" %)PCH contactor feedback error|(% style="width:426px" %)The control signal for the precharging contactor and the contactor feedback differ|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)PCH cont. feed.|(% style="width:40px" %)PCF|(% style="width:190px" %)0x200E-0x200F, bit 9|(% style="width:190px" %)0x200E-0x200F, bit 9 127 +|(% style="width:225px" %)Power fault|(% style="width:426px" %)External devices power supply error: current sensors, HVIL, BMS Logic or CAN2 (int) bus powered devices|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %) |(% style="width:66px" %)Yes|(% style="width:137px" %)Power fault|(% style="width:40px" %)PF|(% style="width:190px" %)0x200E-0x200F, bit 18|(% style="width:190px" %)0x200E-0x200F, bit 18 128 +|(% style="width:225px" %)Power switch error|(% style="width:426px" %)Short circuit in contactor coil control circuit or power switch overheating|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %) |(% style="width:66px" %)Yes|(% style="width:137px" %)PSW error|(% style="width:40px" %)PSE|(% style="width:190px" %)0x200E-0x200F, bit 15|(% style="width:190px" %)0x200E-0x200F, bit 15 129 +|(% style="width:225px" %)Precharge error|(% style="width:426px" %)Capacitive load pre-charge process did not end during the estimated time|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Precharge error|(% style="width:40px" %)PE|(% style="width:190px" %)0x200E-0x200F, bit 17|(% style="width:190px" %)0x200E-0x200F, bit 17 130 +|(% style="width:225px" %)Settings error|(% style="width:426px" %)Wrong checksum of the device settings|(% style="width:77px" %) |(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %) |(% style="width:137px" %)Settings err.|(% style="width:40px" %)SET|(% style="width:190px" %)0x4020 sub 0x00, bit 25|(% style="width:190px" %)0x2007-0x2008, bit 25 131 +|(% style="width:225px" %)Short circuit|(% style="width:426px" %)Flowing high battery currents during a long time|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Short circuit|(% style="width:40px" %)SHC|(% style="width:190px" %)0x4020 sub 0x00, bit 16|(% style="width:190px" %)0x2007-0x2008, bit 16 132 +|(% style="width:225px" %)Shunt error|(% style="width:426px" %)Internal error of the shunt current sensor|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Shunt error|(% style="width:40px" %)SHE|(% style="width:190px" %)0x4020 sub 0x00, bit 24|(% style="width:190px" %)0x2007-0x2008, bit 24 133 +|(% style="width:225px" %)Shunt offline|(% style="width:426px" %)Connection with the shunt current sensor is lost|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Shunt offline|(% style="width:40px" %)SHO|(% style="width:190px" %)0x4020 sub 0x00, bit 23|(% style="width:190px" %)0x2007-0x2008, bit 23 134 +|(% style="width:225px" %)Spirit offline|(% style="width:426px" %)Connection with the Spirit forklift is lost|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Spirit offline|(% style="width:40px" %)SPI|(% style="width:190px" %)0x4020 sub 0x00, bit 29|(% style="width:190px" %)0x2007-0x2008, bit 29 135 +|(% style="width:225px" %)Stuck contactor|(% style="width:426px" %)Some contactor got stuck|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Stuck contactor|(% style="width:40px" %)STC|(% style="width:190px" %)0x200E-0x200F, bit 5|(% style="width:190px" %)0x200E-0x200F, bit 5 136 +|(% style="width:225px" %)Temperature sensor is shorted|(% style="width:426px" %)Some temperature sensors are shorted|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Shorted temp.|(% style="width:40px" %)TSS|(% style="width:190px" %)0x4020 sub 0x00, bit 28|(% style="width:190px" %)0x2007-0x2008, bit 28 137 +|(% style="width:225px" %)Unallowable charging|(% style="width:426px" %)Charging the battery through the discharging contactor|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Unallowable CH|(% style="width:40px" %)UCH|(% style="width:190px" %)0x200E-0x200F, bit 4|(% style="width:190px" %)0x200E-0x200F, bit 4 138 +|(% style="width:225px" %)Undervoltage|(% style="width:426px" %)Voltage of any cell is too low|(% style="width:77px" %) |(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Undervoltage|(% style="width:40px" %)UV|(% style="width:190px" %)0x4020 sub 0x00, bit 1|(% style="width:190px" %)0x2007-0x2008, bit 1 139 +|(% style="width:225px" %)Water|(% style="width:426px" %)There is water in the battery enclosure|(% style="width:77px" %)Yes|(% style="width:93px" %) |(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)Water|(% style="width:40px" %)WHU|(% style="width:190px" %)0x4020 sub 0x00, bit 7|(% style="width:190px" %)0x2007-0x2008, bit 7 140 +|(% style="width:225px" %)WDT reset|(% style="width:426px" %)Watchdog timer reset the device|(% style="width:77px" %)Yes|(% style="width:93px" %)Yes|(% style="width:80px" %)Yes|(% style="width:66px" %)Yes|(% style="width:137px" %)WDT reset|(% style="width:40px" %)WDT|(% style="width:190px" %)0x4020 sub 0x00, bit 26|(% style="width:190px" %)0x2007-0x2008, bit 26 36 36 37 -After successful authentication, the device will send settings and state profiles, which will be displayed as two tabs: "Settings" and "State": 38 - 39 -[[image:Battery management systems.BMS Main 3.3\. Configuration.3\.1 General information.WebHome@1735053858994-348.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="468" width="600"]] 40 - 41 -The monitor window is divided into three areas. The upper area displays controls for starting and stopping communication with the device, information about the device (its name, hardware and firmware versions, time on the device clock), and controls for performing actions with the device (change password, restart, reset, etc.). 42 - 43 -The central area displays the parameters and state variables of the device. The tabs in this area are divided into three columns. The first column displays parameter groups in a tree form, the second column displays records for the selected group, and the third displays the detailed description of the record. 44 - 45 -The lower area shows the history of device activity. 46 - 47 -=== List of supported input signals === 48 - 49 -Here is the list of available input signals of BMS Main 3. 50 - 51 -(% style="width:1227px" %) 52 -|(% colspan="1" rowspan="2" style="width:216px" %)**Name**|(% colspan="1" rowspan="2" style="width:321px" %)**Description**|(% colspan="1" rowspan="2" style="width:258px" %)**Where is used**|(% colspan="3" rowspan="1" style="width:160px" %)**Settable via** 53 -|(% style="width:112px" %)**Discrete input**|(% style="width:159px" %)**CAN**|(% style="width:159px" %)**Modbus** 54 -|(% style="width:216px" %)Battery cover |(% style="width:321px" %) a signal from the battery cover;|(% style="width:258px" %)Battery cover protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 55 -|(% style="width:216px" %)Charger connected |(% style="width:321px" %) a signal indicating that charger is connected;|(% style="width:258px" %)Charge controller, Discharge controller|(% style="width:112px" %)•|(% style="width:159px" %)• (if corresponding External equipment is online)|(% style="width:159px" %) 56 -|(% style="width:216px" %)Power up/down request |(% style="width:321px" %) a request to power down the device;|(% style="width:258px" %)Power down|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 57 -|(% style="width:216px" %)Inhibit charging |(% style="width:321px" %) a command to open the charging contactor;|(% style="width:258px" %) |(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 58 -|(% style="width:216px" %)Inhibit discharging |(% style="width:321px" %) a command to open the discharging contactor;|(% style="width:258px" %) |(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 59 -|(% style="width:216px" %)CH contactor feedback |(% style="width:321px" %) a signal from charging contactor feedback loop;|(% style="width:258px" %)Contactor feedback protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 60 -|(% style="width:216px" %)DCH contactor feedback |(% style="width:321px" %) a signal from discharging contactor feedback loop;|(% style="width:258px" %)Contactor feedback protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 61 -|(% style="width:216px" %)Insulation status |(% style="width:321px" %) a signal from an insulation monitoring device;|(% style="width:258px" %)Insulation protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 62 -|(% style="width:216px" %)Charge request |(% style="width:321px" %) a request to close the charging contactor;|(% style="width:258px" %)Charge controller|(% style="width:112px" %)•|(% style="width:159px" %)• (by request)|(% style="width:159px" %) 63 -|(% style="width:216px" %)Discharge request |(% style="width:321px" %) a request to close the discharging contactor;|(% style="width:258px" %)Discharge controller|(% style="width:112px" %)•|(% style="width:159px" %)• (by request)|(% style="width:159px" %) 64 -|(% style="width:216px" %)PCH contactor feedback |(% style="width:321px" %) a signal from precharging contactor feedback loop;|(% style="width:258px" %)Contactor feedback protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 65 -|(% style="width:216px" %)CH/DCH contactor feedback |(% style="width:321px" %) a signal from charging/discharging contactor feedback loop;|(% style="width:258px" %)Contactor feedback protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 66 -|(% style="width:216px" %)Main contactor feedback |(% style="width:321px" %) a signal from main contactor feedback loop;|(% style="width:258px" %)Contactor feedback protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 67 -|(% style="width:216px" %)Interlock |(% style="width:321px" %) a signal from interlock loop;|(% style="width:258px" %)Interlock protection|(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 68 -|(% style="width:216px" %)Fuse 1, Fuse 2, Fuse 3 |(% style="width:321px" %) signals from fuses;|(% style="width:258px" %) |(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 69 -|(% style="width:216px" %)Circuit breaker status |(% style="width:321px" %) status of protection disconnector;|(% style="width:258px" %) |(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 70 -|(% style="width:216px" %)Balancing request |(% style="width:321px" %) a request to balance the cells;|(% style="width:258px" %)Cell balance|(% style="width:112px" %)•|(% style="width:159px" %)•|(% style="width:159px" %) 71 -|(% style="width:216px" %)Close Main contactor |(% style="width:321px" %) a request to close the main contactor;|(% style="width:258px" %)Main contactor|(% style="width:112px" %)•|(% style="width:159px" %)• (by request)|(% style="width:159px" %) 72 -|(% style="width:216px" %)Close External 1 |(% style="width:321px" %) a request to close the External 1 discrete output (if assigned).|(% style="width:258px" %) |(% style="width:112px" %)•|(% style="width:159px" %) |(% style="width:159px" %) 73 - 74 -=== List of supported input signals === 75 - 76 -Here is the list of available input signals of BMS Main 3. 142 +~* The signal can be assigned to discrete outputs and relays.