Wiki source code of service-scripts
Last modified by Admin on 2026/06/04 13:31
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.1 | 1 | **service-scripts** is a set of Python scripts that help battery manufacturers to automate work with Movicom Electric BMS. |
| |
2.1 | 2 | |
| |
7.1 | 3 | = v0.8.1 = |
| 4 | |||
| 5 | [[service_scripts-0.8.1.tar.gz>>FileManager.service_scripts-0\.8\.1\.tar\.gz]] | ||
| 6 | |||
| 7 | == Improvements == | ||
| 8 | |||
| 9 | * new function for reading the version of the second bootloader via the CLI interface | ||
| 10 | * making several attempts to initiate a firmware update using the UBL protocol | ||
| 11 | |||
| |
6.1 | 12 | = v0.8.0 = |
| 13 | |||
| 14 | [[service_scripts-0.8.0.tar.gz>>FileManager.service_scripts-0\.8\.0\.tar\.gz]] | ||
| 15 | |||
| 16 | == Improvements == | ||
| 17 | |||
| 18 | * interactive script to update all Unibat devices (including BMS Logic) | ||
| 19 | * new script to read current values from BMS Main 3 | ||
| 20 | |||
| |
5.1 | 21 | = v0.7.0 = |
| 22 | |||
| 23 | [[service_scripts-0.7.0.tar.gz>>FileManager.service_scripts-0\.7\.0\.tar\.gz]] | ||
| 24 | |||
| 25 | == Improvements == | ||
| 26 | |||
| 27 | * ability to update BMS Logic devices via a serial port | ||
| 28 | |||
| |
4.1 | 29 | = v0.6.0 = |
| 30 | |||
| 31 | [[service_scripts-0.6.0.tar.gz>>FileManager.service_scripts-0\.6\.0\.tar\.gz]] | ||
| 32 | |||
| 33 | == Improvements == | ||
| 34 | |||
| 35 | * ability to read the device error journal via the CLI interface | ||
| 36 | * ability to download log files from an SD card via the CLI interface | ||
| 37 | * ability to find a log file by a timestamp and download it via the CLI interface | ||
| 38 | * ability to browse files on an SD card and download them via the CLI interface | ||
| 39 | |||
| |
3.1 | 40 | = v0.5.0 = |
| 41 | |||
| 42 | [[service_scripts-0.5.0.tar.gz>>FileManager.service_scripts-0\.5\.0\.tar\.gz]] | ||
| 43 | |||
| 44 | == Improvements == | ||
| 45 | |||
| 46 | * ability to update BMS Logic devices via the CLI interface (BMS Main 3) | ||
| 47 | * ability to read the device state via the CLI interface | ||
| 48 | * ability to read the SD card status via the CLI interface | ||
| 49 | * new script that sets the required temperature sensor mask for BMS Main 3 | ||
| 50 | * new script that applies settings to BMS Main 3X from file |