Wiki source code of Обзор программы

Last modified by Admin on 2026/04/27 12:30

version	line-number	content
51.10	1	ElectricDeviceMonitor is a software to configure, debug and updating Movicom Electric devices.
2.2	2
4.2	3	[[image:1766053068470-669.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="336" width="343"]]
	4
51.10	5	Application consists of following modules:
3.2	6
51.10	7	* Unified monitor – unified module to communicate with BMS Main 3/3X, BMS Main X, BMS Mini, BMS Mini S devices via CAN, USB or TCP connection, and BMS IMD device via CAN bus.
	8	* Device monitors:
	9	** BMS Main 2.1 – module to communicate with BMS Main 2.1 battery controller by CAN bus;
	10	** BMS Logic 2.0 – module to communicate with BMS Logic 2.0 measuring module by RS-485 bus;
	11	** BMS Logic 12/18/RET – module to communicate with BMS Logic 12, BMS Logic 18, BMS Logic RET, BMS Logic 12S devices by RS-485 bus;
	12	** BMS Display 1.x – module to communicate with BMS Display by CAN bus;
	13	** BMS Indication 1.x – module to communicate with BMS Indication by CAN bus;
	14	** BMS Main 1.4 – module to communicate with legacy BMS Main 1.2.-1.4* battery controllers by CAN bus;
	15	** BMS Crown 1.x – module to communicate with BMS Crown* devices by CAN bus;
	16	** BMS Power Control 1.x – module to communicate with BMS Power Control* devices by CAN bus;
	17	* Device update:
	18	** Updater – universal device update module working by CAN, RS-485, USB or TCP connections;
	19	** Unified bootloader – a module to update BMS Main 3/3X devices by USB.
	20	* Log viewer – a module to view device log files.
4.2	21
51.10	22	~* Device is obsolete and no longer produced.
36.3	23
51.10	24
9.1	25	== Unified monitor ==
4.5	26
51.10	27	Unified supports the different methods to connect to a device:
5.2	28
51.10	29	* When connecting via USB it is necessary to set the COM port;
	30	* When connecting via CAN
	31	** with BMS USB-CAN adapter it is necessary to set the COM port, bus speed and device address;
	32	** for other adapters it is necessary to select a device from the list, specify the bus speed and device address;
	33	* When connecting via TCP, enter the IP address of the target device in the local network.
6.2	34
13.2	35	[[image:1766054835921-455.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="229" width="415"]]
7.2	36
51.10	37	After a successful connection, the "Start" button at the top left corner will become inactive, and a user authorization window will appear. This indicates a successful connection.
8.2	38
51.10	39	* Guest - Guest access to view battery state. No permissions to change and view any settings;
	40	* User - A common user access with permissions to change almost all the settings;
	41	* Service - A service account for battery manufacturers. Has access to some additional settings;
	42	* Manufacturer - This account is used by BMS manufacturer and not accessible for others.
8.2	43
	44	[[image:1766054201828-790.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
9.1	45
51.10	46	After successfully entering the password, the main "Unified Monitor" window opens, and the parameters begin to load.
9.1	47
50.1	48	(% class="box infomessage" %)
	49	(((
51.10	50	If connection to the device is lost, the program will attempt to reconnect with previously entered credentials. Attempts will continue until the Stop button is pressed.
50.1	51	)))
20.4	52
51.10	53	The monitor windows is divided into three areas.
20.4	54
51.10	55	[[image:1766054651152-306.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="52" width="600"]]
10.2	56
51.10	57	The top area displays:
10.2	58
51.10	59	* Controls for starting and stopping data exchange with the device.
	60	* Device information (name and serial number, hardware and software version, bootloader version).
	61	* The device's clock time with synchronization capability.
	62	* Controls for performing actions on the device (changing the password, restarting, resetting settings, etc.).
9.1	63
51.10	64	[[image:1766055717373-251.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="200" width="166"]]
20.4	65
51.10	66	The "Device" menu contains the following items:
20.4	67
51.10	68	* Log in – open the re-authorization window.
	69	* Change password – open the window to change the password for the current user.
	70	* SD card – open the window for interacting with the installed SD card.
	71	* Update firmware – open the window for updating the device firmware via Unified Monitor. The update process via Unified Monitor is described in the documentation for the corresponding device (e.g., [[BMS Mini S>>doc:Battery management systems.BMS Mini S.6\. Firmware update.WebHome]]). An SD card must be installed to perform an update in this mode.
	72	* Reboot – device restart.
	73	* Go to bootloader – switch the device to bootloader mode.
24.3	74
51.10	75	[[image:1766059260100-912.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]"Settings" menu contains the item to reset the device settings.
24.3	76
	77
51.10	78	[[image:1766056213709-221.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="276" width="600"]]
24.3	79
51.10	80	The SD card interaction window consists of two parts:
24.3	81
51.10	82	* left part displays the contents of the SD card;
	83	* right part displays the contents of the selected folder.
24.3	84
51.10	85	To download a file from the SD card (folders cannot be downloaded), select the file in the left part of the window and click the arrow in the middle.
24.3	86
51.10	87	In the upper right corner, there is a menu for actions with the SD card.
24.3	88
51.10	89	[[image:1766058987135-535.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
24.3	90
51.10	91	In this menu:
24.3	92
51.10	93	* Reload status – Refresh the SD card status.
	94	* Mount – Mount the SD card.
	95	* Unmount – Unmount the SD card.
	96	* Format – Format the SD card to FAT32 format. The card must be unmounted before formatting.
12.3	97
14.2	98
51.10	99
	100	The central area displays the device parameters (Settings tab), device states (State tab), and, if supported, device profile data (Profile tab).
	101
	102	The content in this area are divided into three columns:
	103
	104	* The first column displays parameter groups in a tree structure;
	105	* The second column displays entries for the selected group;
	106	* The third column displays a detailed description of the entry, fields for entering a new value, and a save button.
	107
20.4	108	[[image:1766055020158-734.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="221" width="600"]]
14.2	109
51.10	110	Above the column of parameter groups there are the following buttons:
20.5	111
51.10	112	* Reload – reread all board parameters;
	113	* Save – save all changed parameters simultaneously;
	114	* Export – export settings from the device to a text file;
	115	* Import – import settings from a text file into the device. After importing the settings, click the Save button.
20.5	116
15.2	117
	118
51.10	119	The bottom area displays the history of actions performed with the device.
24.2	120
	121	[[image:1766054531745-297.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="73" width="600"]]
	122
21.3	123	== BMS Main 2.1 ==
21.2	124
51.10	125	The BMS Main 2.1 monitor allows you to connect the device via the CAN bus. To do this, select the corresponding CAN adapter and choose a device from the list (Systec, PEAK, or Marathon) or specify the COM port number (BMS USB-CAN).
21.2	126
23.1	127	[[image:1766059864519-882.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="237" width="430"]]
21.2	128
51.10	129	The structure of the monitor window's sections and menus is similar to the Web interface and is described in the [[BMS Main 2.1 documentation>>doc:Battery management systems.BMS Main 2\.1.WebHome]].
21.2	130
21.7	131	== BMS Logic 2.0 ==
	132
51.10	133	[[image:1766163467280-836.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="507" width="600"]]
21.7	134
51.10	135	The BMS Logic 2.0 setup and verification window is divided into two areas.
42.2	136
51.10	137	The upper area contains information about all cells connected to the device. Key parameters are displayed vertically relative to the corresponding cell (Cell 1 - Cell 12).
42.2	138
51.10	139	* The "//Volts//" field displays the cell voltage in volts. The minimum and maximum voltage among all cells are highlighted with blue and red backgrounds respectively. A graphical representation of the cell voltage is located above the numeric field. Below are fields for specifying the actual (reference) cell voltage. The difference between the reference and measured cell voltages is shown in the "Difference" row and is color-coded depending on the degree of discrepancy. This helps to easily track the voltage measurement error of the BMS Logic device. The error threshold values are set in the "Commands" section at the bottom of the window. Also, using the "Capture" button, it is possible to memorize the current voltage values of all cells if it is needed to compare several BMS Logic devices with each other.
	140	* The temperature sensor readings in the "//°C//" field are displayed similarly – there is an option to memorize temperature readings and monitor the difference between measured and reference readings in real time. The model of the temperature sensor used is set in the "Temperature sensor" field below.
	141	* The "//Discharge//" row contains flags indicating whether balancing is enabled for the corresponding cell.
	142	* The "//Board temperature//" field shows the temperature of the BMS Logic board. The fields to the right are for entering the temperature measured by an external thermometer (first field) and the maximum allowable measurement error (second field). The current measurement error is shown in the third field with color highlighting.
	143	* The "//Temperature sensor//" field allows you to set the model of the thermistor used for temperature measurement.
	144	* The "//Voltage difference//" field indicates the difference between the minimum and maximum cell voltages.
	145	* The "//Temperature difference//" field indicates the difference between the minimum and maximum temperatures.
43.1	146
51.10	147	The Commands area contains fields for sending commands to the device, as well as error thresholds for voltage and temperature measurement:
43.1	148
51.10	149	* Discharge all cells – command to balance all cells.
	150	* Yellow voltage difference – threshold value for cell voltage measurement error for the yellow level, V.
	151	* Red voltage difference – threshold value for cell voltage measurement error for the red level, V.
	152	* Yellow temperature difference – threshold value for cell temperature measurement error for the yellow level, °C.
	153	* Red temperature difference – threshold value for cell temperature measurement error for the red level, °C.
	154
21.4	155	== BMS Logic 12/18/RET ==
21.3	156
51.10	157	The process of connecting and configuring the BMS Logic 12/18/RET/12S devices is described in the documentation for the corresponding device (for example, [[BMS Logic 12>>doc:Battery management systems.BMS Logic 12.3\. Configuration.WebHome]]).
21.4	158
51.10	159	[[image:1766160450855-648.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="459" width="600"]]
24.2	160
51.10	161	The BMS Logic device setup and verification window is divided into three areas.
40.3	162
51.10	163	The Info area contains device information:
40.4	164
51.10	165	* Hardware version;
	166	* Software version;
	167	* Cell count – number of cells currently connected.
	168	* Serial number – device serial number. The serial number is saved once during board production.
	169	* Balancing resistance – balancing resistor value, Ohms. Set once during board production.
	170	* Address – unique device address. Each BMS Logic device connected to a BMS Main controller must have a unique address.
40.4	171
51.10	172	The Measurements area contains information about all cells connected to the device. Key parameters are displayed vertically relative to the corresponding cell (Cell 1 - Cell 18).
40.4	173
51.10	174	* The "//Volts//" field displays the cell voltage in volts. The minimum and maximum voltage among all cells are highlighted with blue and red backgrounds respectively. A graphical representation of the cell voltage is located above the numeric field. Below are fields for specifying the actual (reference) cell voltage. The difference between the reference and measured cell voltages is shown in the "Difference" row and is color-coded depending on the degree of discrepancy. This helps to easily track the voltage measurement error of the BMS Logic device. The error threshold values are set in the "Commands" section at the bottom of the window. Also, using the "Capture" button, it is possible to memorize the current voltage values of all cells if it is needed to compare several BMS Logic devices with each other.
	175	* The temperature sensor readings for each cell in the "//°C//" field are displayed similarly – there is an option to memorize temperature readings and monitor the difference between measured and reference readings in real time. The model of the temperature sensor used is set in the "Temperature sensor" field below.
	176	* The "//Inputs (C0-C18)//" row displays the connection status of the corresponding voltage measurement line.
	177	* The "//Discharge//" row contains flags indicating whether balancing is enabled for the corresponding cell.
	178	* The "//uOhm//" row is not used.
	179	* The "//Board temperature//" field shows the temperature of the BMS Logic board. The fields to the right are for entering the temperature measured by an external thermometer (first field) and the maximum allowable measurement error (second field). The current measurement error is shown in the third field with color highlighting.
	180	* The "//Temperature sensor//" field allows you to set the model of the thermistor used for temperature measurement.
	181	* The "//Voltage difference//" field indicates the difference between the minimum and maximum cell voltages.
	182	* The "//Temperature difference//" field indicates the difference between the minimum and maximum temperatures.
41.2	183
51.10	184	The Commands area contains fields for sending commands to the device, as well as error thresholds for voltage and temperature measurement:
41.2	185
51.10	186	* Discharge all cells – command to balance all cells.
	187	* Sleep – put the device into sleep mode.
	188	* Wake up – take the device out of sleep mode into operational mode.
	189	* Bootloader – put the device into bootloader mode.
	190	* Yellow voltage difference – threshold value for cell voltage measurement error for the yellow level, V.
	191	* Red voltage difference – threshold value for cell voltage measurement error for the red level, V.
	192	* Yellow temperature difference – threshold value for cell temperature measurement error for the yellow level, °C.
	193	* Red temperature difference – threshold value for cell temperature measurement error for the red level, °C.
	194	* The "Resistance calculation" row is not used.
	195
46.1	196	== BMS Display ==
21.4	197
51.10	198	The BMS Display monitor window is described in the [[BMS Display documentation>>doc:Battery management systems.BMS Display.3\. Configuration.WebHome]].
21.5	199
	200	== BMS Indication ==
	201
51.10	202	The BMS Indication monitor window is described in the [[BMS Indication documentation>>doc:Battery management systems.BMS Indication.3\. Configuration.WebHome]].
21.8	203
25.1	204	== Updater ==
	205
51.10	206	The updater module allows updating the firmware of BMS Mini, BMS Mini S, BMS Main X, BMS Main 2.1, BMS Logic 12/18/RET/12S, BMS Display, and BMS IMD devices through the bootloader.
25.1	207
51.10	208	The process of updating through bootloader is described in the "Firmware Update" section of the documentation for the corresponding device (for example, [[BMS Main 2.1>>doc:Battery management systems.BMS Main 2\.1.4\. Firmware update.WebHome]]).
25.1	209
	210	== Unified bootloader ==
	211
51.10	212	The unified bootloader module allows updating the firmware of BMS Main 3 and BMS Main 3X.
25.1	213
51.10	214	The process of updating through unified bootloader is described in the "Firmware Update" section of the [[BMS Main 3 documentation>>doc:Battery management systems.BMS Main 3.6\. Firmware update.WebHome]].
25.4	215
	216	== Log viewer ==
	217
51.10	218	The Log Viewer module allows you to analyze device log files with the capability to plot graphs and display selected parameters in a tabular format.
26.2	219
51.10	220	To get started:
30.2	221
51.10	222	~1. Create a new database using the "New database" button.
30.2	223
35.1	224	[[image:1766062577813-983.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="135" width="226"]]
30.2	225
51.10	226	2. Enter a name for the database and select a folder to store it.
30.2	227
35.1	228	[[image:1766062577815-237.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="291" width="394"]]
30.2	229
51.10	230	3. Import log files using the "Import CSV" button
30.2	231
34.1	232	[[image:1766062577817-283.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="188" width="228"]]
30.2	233
51.10	234	4. Select the log files you wish to import
30.2	235
35.1	236	[[image:1766062577818-783.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="273" width="373"]]
30.2	237
51.10	238	To display data in graphical form, select the "Graphic view" tab. The graphs show only the parameters selected in the left part of the window. The "From" and "To" fields define the time range for which to plot the graph. The module supports both single and dual graph window modes, as well as automatic or manual vertical scaling of the graphs. The time interval displayed on the graphs can be selected in the lower right corner.
32.2	239
51.10	240	[[image:1766062707743-878.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="325" width="432"]]
32.2	241
51.10	242	To display data in tabular form, select the "Table view" tab. The "From" and "To" fields allow you to select the time range for which to display data. Only the parameters selected in the left part of the window are shown in the columns.
	243
33.1	244	[[image:1766062736332-834.png\|\|data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="315" width="419"]]
51.10	245	{{comment}}{{/comment}}

Wiki source code of Обзор программы

Applications

Navigation

Table of Contents