Skip to Content

Changes for page BMS Main X

Last modified by Admin on 2025/07/22 11:39
From version 8.1
edited by Admin
on 2025/07/22 11:39
Change comment: There is no comment for this version
To version 6.1
edited by Admin
on 2025/02/19 08:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,44 +3,6 @@
3 3  BMS Main X firmware update procedure is described [[here>>doc:Battery management systems.BMS Main X.5\. Firmware update.WebHome]].
4 4  )))
5 5  
6 -= v2.8.1 =
7 -
8 -[[BMS_Main_X2_v2.8.1.srec>>FileManager.BMS_Main_X2_v2\.8\.1\.srec]]
9 -
10 -== Improvements ==
11 -
12 -* new CLI command "find-log" which finds a log file containing a specified timestamp
13 -* ability to acknowledge battery module errors via CLI (see the "Service - Errors journal" section) and Modbus protocol
14 -
15 -== Fixes ==
16 -
17 -* resolving the issue of rebooting the device if formatting the SD card is activated
18 -
19 -= v2.8.0 =
20 -
21 -[[BMS_Main_X2_v2.8.0.srec>>FileManager.BMS_Main_X2_v2\.8\.0\.srec]]
22 -
23 -== Features ==
24 -
25 -* new flags that allow to interrupt (shorten) the module balancing stage if all battery modules are already joined (see the "Control - Charge", "Control - Discharge", "Control - Charge/Discharge" sections)
26 -* forwarding CLI and bootloader CAN messages from CAN EXT interface to CAN INT interface and back
27 -* new parameter for setting the type of network to which the BMS GSM communication module connects (see the "Connectivity - Cellular" section)
28 -* new flag that controls whether to use open circuit voltage or actual voltage when determining the voltage unbalance error (see the "Protections - Voltage unbalance (in any state)" section)
29 -* new regulator that maintains battery current limiting to ensure that actual module currents do not exceed their current limits (see the "Control - Charge", "Control - Discharge", "Control - Charge/Discharge" sections)
30 -* ability to select the battery module errors that cause the battery critical error (see the "Protections - Critical error" section)
31 -* ability to update the device serial number from the service account if the number is reset to the default value for some reason (see the "Service" section)
32 -
33 -== Improvements ==
34 -
35 -* dynamic calculation of data transfer schedule for optimal communication with a large number of battery modules
36 -* ability to complete device initialization after the set timeout has expired and the minimum number of modules has been detected (see the "Control - Initialization" section)
37 -* 30 second delay when remounting SD card after detecting mount error
38 -* saving the number of joined modules in log files
39 -
40 -== Fixes ==
41 -
42 -* resolving the issue of saving some battery module signals in log files
43 -
44 44  = v2.7.0 =
45 45  
46 46  [[BMS_Main_X2_v2.7.0.srec>>FileManager.BMS_Main_X2_v2\.7\.0\.srec]]