Skip to Content

Changes for page BMS Main X

Last modified by Admin on 2025/05/28 10:39
From version 7.1
edited by Admin
on 2025/05/28 10:39
Change comment: There is no comment for this version
To version 6.1
edited by Admin
on 2025/02/19 08:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,31 +3,6 @@
3 3  BMS Main X firmware update procedure is described [[here>>doc:Battery management systems.BMS Main X.5\. Firmware update.WebHome]].
4 4  )))
5 5  
6 -= v2.8.0 =
7 -
8 -[[BMS_Main_X2_v2.8.0.srec>>FileManager.BMS_Main_X2_v2\.8\.0\.srec]]
9 -
10 -== Features ==
11 -
12 -* new flags that allow to interrupt (shorten) the module balancing stage if all battery modules are already joined (see the "Control - Charge", "Control - Discharge", "Control - Charge/Discharge" sections)
13 -* forwarding CLI and bootloader CAN messages from CAN EXT interface to CAN INT interface and back
14 -* new parameter for setting the type of network to which the BMS GSM communication module connects (see the "Connectivity - Cellular" section)
15 -* new flag that controls whether to use open circuit voltage or actual voltage when determining the voltage unbalance error (see the "Protections - Voltage unbalance (in any state)" section)
16 -* new regulator that maintains battery current limiting to ensure that actual module currents do not exceed their current limits (see the "Control - Charge", "Control - Discharge", "Control - Charge/Discharge" sections)
17 -* ability to select the battery module errors that cause the battery critical error (see the "Protections - Critical error" section)
18 -* ability to update the device serial number from the service account if the number is reset to the default value for some reason (see the "Service" section)
19 -
20 -== Improvements ==
21 -
22 -* dynamic calculation of data transfer schedule for optimal communication with a large number of battery modules
23 -* ability to complete device initialization after the set timeout has expired and the minimum number of modules has been detected (see the "Control - Initialization" section)
24 -* 30 second delay when remounting SD card after detecting mount error
25 -* saving the number of joined modules in log files
26 -
27 -== Fixes ==
28 -
29 -* resolving the issue of saving some battery module signals in log files
30 -
31 31  = v2.7.0 =
32 32  
33 33  [[BMS_Main_X2_v2.7.0.srec>>FileManager.BMS_Main_X2_v2\.7\.0\.srec]]