Изменения документа BMS Main 3X

Сводка

• Свойства страницы (1 изменено, 0 добавлено, 0 удалено)

Подробности

Свойства страницы

Содержимое

...	...	@@ -3,6 +3,23 @@
3	3	BMS Main 3X firmware update procedure is described [[here>>doc:Battery management systems.BMS Main 3.6\. Firmware update.WebHome]].
4	4	)))
5	5
	6	+= v3.8.1 =
	7	+
	8	+[[BMS_Main_3X_v3.8.1.bin>>FileManager.BMS_Main_3X_v3\.8\.1\.bin]]
	9	+
	10	+== Improvements ==
	11	+
	12	+* setting and clearing the "Voltage unbalance" errors without delays
	13	+* new CAN bus speed is not applied until the device is rebooted
	14	+* logging the following new parameters: "UnibatState", "UnibatOperationalModeState", "Keyrun", "ChargeOn"
	15	+* Unibat: ability to shutdown the battery if its SOC is too low (see the "External equipment - Unibat vehicle - Diagnostic parameters" section)
	16	+* Unibat: change the resolution of parameters CC and DC from 0.01 to 0.1 Ah/bit
	17	+* Unibat: do not turn on the amber lamp if the actual battery SOC is equal to the configured maximum operational SOC
	18	+
	19	+== Fixes ==
	20	+
	21	+* resolving the problem of completing the initialization process before the power switch voltage stabilizes
	22	+
6	6	= v3.8.0 =
7	7
8	8	[[BMS_Main_3X_v3.8.0.bin>>FileManager.BMS_Main_3X_v3\.8\.0\.bin]]