Changes for page BMS Main 3

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -3,6 +3,39 @@
3	3	BMS Main 3 firmware update procedure is described [[here>>doc:Battery management systems.BMS Main 3.5\. Firmware update.WebHome]].
4	4	)))
5	5
	6	+= v2.7.0 =
	7	+
	8	+[[BMS_Main_3_v2.7.0.bin>>FileManager.BMS_Main_3_v2\.7\.0\.bin]]
	9	+
	10	+== Features ==
	11	+
	12	+* new algorithm for detecting loss of wire connection to battery cells
	13	+* new protection for detecting battery cell imbalance (see the "Protections - Cell imbalance" section)
	14	+* new "Main X offline" error indicating loss of connection with the BMS Main X device
	15	+
	16	+== Improvements ==
	17	+
	18	+* new flag enabling fast current measurements (see the "Signals - Current sensor" section)
	19	+* new parameters that control setting/clearing the "Ready to charge" and "Ready to discharge" signals based on the charge and/or discharge current limits (see the "Control - Charging status" and "Control - Discharging status" sections)
	20	+* new parameters to ignore the specified errors when setting the critical error (see the "Protections - Critical error" section)
	21	+* displaying HV calibration values for the service account (see the "Service - Calibration" section)
	22	+
	23	+= v2.6.0 =
	24	+
	25	+[[BMS_Main_3_v2.6.0.bin>>FileManager.BMS_Main_3_v2\.6\.0\.bin]]
	26	+
	27	+== Features ==
	28	+
	29	+* support for sending battery state and events via MQTT protocol via Wi-Fi or cellular network (see the "Service - MQTT" section)
	30	+
	31	+== Improvements ==
	32	+
	33	+* support for secure (TLS) connections in BMS GSM v1 and v2 drivers
	34	+
	35	+== Fixes ==
	36	+
	37	+* synchronization of the precharge procedure with the charge/discharge algorithms, so that precharge is stopped if charging and discharging are prohibited
	38	+
6	6	= v2.5.0 =
7	7
8	8	[[BMS_Main_3_v2.5.0.bin>>FileManager.BMS_Main_3_v2\.5\.0\.bin]]