Skip to Content

Wiki source code of BMS Main 2.1

Version 7.1 by Admin on 2024/12/25 14:05
Show last authors
1 (% class="box infomessage" %)
2 (((
3 BMS Main 2.1 firmware update procedure is described [[here>>doc:Battery management systems.BMS Main 2\.1.4\. Firmware update.WebHome]].
4 )))
5
6 = v1.68.0 =
7
8 [[BMS_Main_2.1_v1.68.0.srec>>FileManager.BMS_Main_2\.1_v1\.68\.0\.srec]]
9
10 == Features ==
11
12 - support for charge/discharge cycling using XD Discharger (see the sections "External equipment - Battery cycling" and "External equipment - XD Discharger (cycling)")
13
14 = v1.67.0 =
15
16 [[BMS_Main_2.1_v1.67.0.srec>>FileManager.BMS_Main_2\.1_v1\.67\.0\.srec]]
17
18 == Features ==
19
20 * new additional heater controller (see the "Protections - Heater (AUX) control" section), which generates the "Heater (AUX)" signal, which can be assigned to a discrete output or relay
21
22 == Improvements ==
23
24 * new balancing strategy that attempts to keep the temperature of BMS Logic devices below a set value by discharging cells with higher voltages first than others (see the "Cells - Cell balancing" section)
25
26 = v1.66.1 =
27
28 [[BMS_Main_2.1_v1.66.1.srec>>FileManager.BMS_Main_2\.1_v1\.66\.1\.srec]]
29
30 == Improvements ==
31
32 * closing all TCP connections over Ethernet if the interface link is down
33
34 = v1.66.0 =
35
36 [[BMS_Main_2.1_v1.66.0.srec>>FileManager.BMS_Main_2\.1_v1\.66\.0\.srec]]
37
38 == Features ==
39
40 * support for the insulation monitoring device BMS IMD (see the section "External equipment - BMS IMD device")
41
42 == Improvements ==
43
44 * new parameters for switching off the Discharging (AUX) relay when the cell voltage is too low (see the "Cells - Discharging (AUX) control" section)