Wiki source code of BMS Main 2.1
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
3.1 | 1 | = v1.67.0 = |
| 2 | |||
| 3 | [[BMS_Main_2.1_v1.67.0.srec>>FileManager.BMS_Main_2\.1_v1\.67\.0\.srec]] | ||
| 4 | |||
| 5 | == Features == | ||
| 6 | |||
| 7 | * new additional heater controller (see the "Protections - Heater (AUX) control" section), which generates the "Heater (AUX)" signal, which can be assigned to a discrete output or relay | ||
| 8 | |||
| 9 | == Improvements == | ||
| 10 | |||
| 11 | * new balancing strategy that attempts to keep the temperature of BMS Logic devices below a set value by discharging cells with higher voltages first than others (see the "Cells - Cell balancing" section) | ||
| 12 | |||
| 13 | = v1.66.1 = | ||
| 14 | |||
| 15 | [[BMS_Main_2.1_v1.66.1.srec>>FileManager.BMS_Main_2\.1_v1\.66\.1\.srec]] | ||
| 16 | |||
| 17 | == Improvements == | ||
| 18 | |||
| 19 | * closing all TCP connections over Ethernet if the interface link is down | ||
| 20 | |||
| |
2.1 | 21 | = v1.66.0 = |
| |
1.2 | 22 | |
| 23 | [[BMS_Main_2.1_v1.66.0.srec>>FileManager.BMS_Main_2\.1_v1\.66\.0\.srec]] | ||
| 24 | |||
| |
2.1 | 25 | == Features == |
| 26 | |||
| 27 | * support for the insulation monitoring device BMS IMD (see the section "External equipment - BMS IMD device") | ||
| 28 | |||
| 29 | == Improvements == | ||
| 30 | |||
| 31 | * new parameters for switching off the Discharging (AUX) relay when the cell voltage is too low (see the "Cells - Discharging (AUX) control" section) |