Skip to Content

Changes for page BMS Main 2.1

Last modified by Admin on 2026/01/30 09:17
From version 17.1
edited by Admin
on 2026/01/30 09:17
Change comment: There is no comment for this version
To version 14.2
edited by Admin
on 2025/08/07 15:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,30 +3,6 @@
3 3  BMS Main 2.1 firmware update procedure is described [[here>>doc:Battery management systems.BMS Main 2\.1.4\. Firmware update.WebHome]].
4 4  )))
5 5  
6 -= v1.70.6 =
7 -
8 -[[BMS_Main_2.1_v1.70.6.srec>>FileManager.BMS_Main_2\.1_v1\.70\.6\.srec]]
9 -
10 -== Improvements ==
11 -
12 -* support for 32-bit BMS Logic serial numbers
13 -* increasing the stability of the BMS Wi-Fi v2 driver
14 -
15 -== Fixes ==
16 -
17 -* resolving the problem of charge, discharge, and charge/discharge contactors closing when the "Precharge request" signal is set
18 -* synchronization of the precharge procedure with the charge/discharge algorithms, so that precharge is stopped if charging and discharging are prohibited
19 -* resolving the stability problem when the SD card is full
20 -* small fixes in current maps
21 -
22 -= v1.70.5 =
23 -
24 -[[BMS_Main_2.1_v1.70.5.srec>>FileManager.BMS_Main_2\.1_v1\.70\.5\.srec]]
25 -
26 -== Fixes ==
27 -
28 -* resolving the issue of Ethernet packet retransmission
29 -
30 30  = v1.70.4 =
31 31  
32 32  [[BMS_Main_2.1_v1.70.4.srec>>FileManager.BMS_Main_2\.1_v1\.70\.4\.srec]]
... ... @@ -33,11 +33,11 @@
33 33  
34 34  == Improvements ==
35 35  
36 -* new flags for generating the "Ready to charge" and "Ready to discharge" signals using the actual cell voltage instead of the calculated open circuit voltage (see the "Cells - Charging control" and "Cells - Discharging control" sections)
12 +new flags for generating the "Ready to charge" and "Ready to discharge" signals using the actual cell voltage instead of the calculated open circuit voltage (see the "Cells - Charging control" and "Cells - Discharging control" sections)
37 37  
38 -== Fixes ==
14 +Fixes
39 39  
40 -* resolving the issue of rebooting the device if formatting the SD card is activated
16 +resolving the issue of rebooting the device if formatting the SD card is activated
41 41  
42 42  = v1.70.3 =
43 43