Изменения документа BMS Main 2.1

Сводка

• Свойства страницы (1 изменено, 0 добавлено, 0 удалено)

Подробности

Свойства страницы

Содержимое

...	...	@@ -3,6 +3,29 @@
3	3	BMS Main 2.1 firmware update procedure is described [[here>>doc:Battery management systems.BMS Main 2\.1.4\. Firmware update.WebHome]].
4	4	)))
5	5
	6	+= v1.70.4 =
	7	+
	8	+[[BMS_Main_2.1_v1.70.4.srec>>FileManager.BMS_Main_2\.1_v1\.70\.4\.srec]]
	9	+
	10	+== Improvements ==
	11	+
	12	+* new flags for generating the "Ready to charge" and "Ready to discharge" signals using the actual cell voltage instead of the calculated open circuit voltage (see the "Cells - Charging control" and "Cells - Discharging control" sections)
	13	+
	14	+== Fixes ==
	15	+
	16	+* resolving the issue of rebooting the device if formatting the SD card is activated
	17	+
	18	+= v1.70.3 =
	19	+
	20	+[[BMS_Main_2.1_v1.70.3.srec>>FileManager.BMS_Main_2\.1_v1\.70\.3\.srec]]
	21	+
	22	+== Improvements ==
	23	+
	24	+* new flags that force the precharge process to finish if the battery current is negative (in case the battery will be charging) or positive (in case the battery will be discharging); see the "Cells - Charging control" and "Cells - Discharging control" sections
	25	+* 30 second delay when remounting SD card after detecting mount error
	26	+* new flag to prevent the "HYG offline" error from occurring if the "Charger connected" signal is set (see the "External equipment - HYG Class I-III truck" section)
	27	+* new flag that controls whether to wait for confirmation from the HYG truck or not, to allow the battery to be charged (see the "External equipment - HYG Class I-III truck" section)
	28	+
6	6	= v1.70.2 =
7	7
8	8	[[BMS_Main_2.1_v1.70.2.srec>>FileManager.BMS_Main_2\.1_v1\.70\.2\.srec]]