Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% class="box infomessage" %) | ||
| 2 | ((( | ||
| 3 | BMS IMD firmware update procedure is described [[here>>doc:Battery management systems.BMS IMD.5\. Firmware update.WebHome]]. | ||
| 4 | ))) | ||
| 5 | |||
| 6 | = v1.2.5 = | ||
| 7 | |||
| 8 | [[BMS_IMD_v1.2.5.srec>>FileManager.BMS_IMD_v1\.2\.5\.srec]] | ||
| 9 | |||
| 10 | == Fixes == | ||
| 11 | |||
| 12 | * resolving the problem of erasing device parameters when power is turned off while applying new parameter values | ||
| 13 | |||
| 14 | = v1.2.4 = | ||
| 15 | |||
| 16 | == Improvements == | ||
| 17 | |||
| 18 | * improved calibration algorithm that is also available for service account | ||
| 19 | |||
| 20 | = v1.2.3 = | ||
| 21 | |||
| 22 | == Fixes == | ||
| 23 | |||
| 24 | * small fixes in the CLI protocol | ||
| 25 | |||
| 26 | = v1.2.2 = | ||
| 27 | |||
| 28 | == Fixes == | ||
| 29 | |||
| 30 | * resolving the problem of detecting low voltage error immediately after the device is allowed to work | ||
| 31 | |||
| 32 | = v1.2.1 = | ||
| 33 | |||
| 34 | == Improvements == | ||
| 35 | |||
| 36 | * performing self-testing of the device after each allowance of operation | ||
| 37 | * increasing measurement accuracy | ||
| 38 | |||
| 39 | == Fixes == | ||
| 40 | |||
| 41 | * resolving the problem of detecting a self-test error after a long period of device inactivity at the moment when operation becomes allowed |