| ... |
... |
@@ -24,11 +24,10 @@ |
| 24 |
24 |
(% class="box warningmessage" %) |
| 25 |
25 |
((( |
| 26 |
26 |
**Attention!** |
| 27 |
|
-Connecting the BMS Wi-Fi is performed on powered-off BMS controller! |
| 28 |
|
-To prevent the damage of device avoid electrostatic discharges. |
|
27 |
+Connecting the BMS Wi-Fi 2.x is performed on powered-off BMS controller! |
| 29 |
29 |
))) |
| 30 |
30 |
|
| 31 |
|
-The BMS Wi-Fi must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.** |
|
30 |
+The BMS Wi-Fi 2.x must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.** |
| 32 |
32 |
|
| 33 |
33 |
Here is the example of header for additional devices on BMS Main 2.1: |
| 34 |
34 |
|
| ... |
... |
@@ -36,11 +36,9 @@ |
| 36 |
36 |
|
| 37 |
37 |
= Configuration = |
| 38 |
38 |
|
| 39 |
|
-Configuration of the BMS Wi-Fi must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]]. |
|
38 |
+Configuration of the BMS Wi-Fi 2.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]]. Typically, the connection settings are in the “Connectivity -> Wi-Fi” section of the settings. |
| 40 |
40 |
|
| 41 |
|
-Typically, the connection settings are in the “Connectivity -> Wi-Fi” section of the settings. |
| 42 |
|
- |
| 43 |
|
-(% class="box infomessage" %) |
|
40 |
+(% class="box warningmessage" %) |
| 44 |
44 |
((( |
| 45 |
45 |
To apply new connection settings, it is necessary to restart the BMS. |
| 46 |
46 |
))) |
