| ... |
... |
@@ -2,7 +2,7 @@ |
| 2 |
2 |
|
| 3 |
3 |
[[image:1734098239926-800.png||data-xwiki-image-style-alignment="center" height="179" width="300"]] |
| 4 |
4 |
|
| 5 |
|
-BMS Wi-Fi is an extension module that can be inserted into the BMS Mini 2, BMS Mini S, BMS Main 2.1, BMS Main 3, BMS Main X or BMS Main 3X controller. It allows a BMS controller to be configured over a Wi-Fi network and send battery data to a remote server. |
|
5 |
+BMS Wi-Fi is an extension module that can be inserted into the BMS Mini 2, BMS Mini S, BMS Main 2R, BMS Main 3, BMS Main X or BMS Main 3X controller. It allows a BMS controller to be configured over a Wi-Fi network and send battery data to a remote server. |
| 6 |
6 |
|
| 7 |
7 |
Diagram of a battery system controlled by a top-level system over the Wi-Fi network is shown below: |
| 8 |
8 |
|
| ... |
... |
@@ -14,7 +14,7 @@ |
| 14 |
14 |
|Supply voltage, V|5.0 ± 0.5 |
| 15 |
15 |
|Current consumption @5 V, mA (maximum)|400 |
| 16 |
16 |
|Network frequency, Ghz|2.4 |
| 17 |
|
-|Supported network standarts|IEEE 802.11a/b/g |
|
17 |
+|Supported network standarts|IEEE 802.11b/g/n |
| 18 |
18 |
|Dimensions (length × width × height), mm|40 × 37 × 15 |
| 19 |
19 |
|Weight, g|10 ± 5 |
| 20 |
20 |
|Operating temperature range, °С|-40 to +85 |
| ... |
... |
@@ -25,6 +25,7 @@ |
| 25 |
25 |
((( |
| 26 |
26 |
**Attention!** |
| 27 |
27 |
Connecting the BMS Wi-Fi is performed on powered-off BMS controller! |
|
28 |
+To prevent the damage of device avoid electrostatic discharges. |
| 28 |
28 |
))) |
| 29 |
29 |
|
| 30 |
30 |
The BMS Wi-Fi must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.** |
