Skip to Content

Changes for page BMS Wi-Fi

Last modified by Admin on 2025/03/19 11:48
From version 7.1
edited by Admin
on 2025/01/16 16:32
Change comment: Загрузить новое вложение 1737045121902-531.png
To version 9.1
edited by Admin
on 2025/03/18 12:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -24,10 +24,11 @@
24 24  (% class="box warningmessage" %)
25 25  (((
26 26  **Attention!**
27 -Connecting the BMS Wi-Fi 2.x is performed on powered-off BMS controller!
27 +Connecting the BMS Wi-Fi is performed on powered-off BMS controller!
28 +To prevent the damage of device avoid electrostatic discharges.
28 28  )))
29 29  
30 -The BMS Wi-Fi 2.x must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.**
31 +The BMS Wi-Fi must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.**
31 31  
32 32  Here is the example of header for additional devices on BMS Main 2.1:
33 33  
... ... @@ -35,11 +35,11 @@
35 35  
36 36  = Configuration =
37 37  
38 -Configuration of the BMS Wi-Fi 2.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]].
39 +Configuration of the BMS Wi-Fi must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]].
39 39  
40 40  Typically, the connection settings are in the “Connectivity -> Wi-Fi” section of the settings.
41 41  
42 -(% class="box warningmessage" %)
43 +(% class="box infomessage" %)
43 43  (((
44 44  To apply new connection settings, it is necessary to restart the BMS.
45 45  )))