| ... |
... |
@@ -19,25 +19,28 @@ |
| 19 |
19 |
|Weight, g|10 ± 5 |
| 20 |
20 |
|Operating temperature range, °С|-40 to +85 |
| 21 |
21 |
|
| 22 |
|
-= Installation procedure = |
|
22 |
+= Installation = |
| 23 |
23 |
|
| 24 |
24 |
(% class="box warningmessage" %) |
| 25 |
25 |
((( |
| 26 |
26 |
**Attention!** |
| 27 |
|
-Connecting the BMS Wi-Fi 2.x is performed on powered-off BMS controller! |
|
27 |
+Connecting the BMS Wi-Fi is performed on powered-off BMS controller! |
|
28 |
+To prevent the damage of device avoid electrostatic discharges. |
| 28 |
28 |
))) |
| 29 |
29 |
|
| 30 |
|
-The BMS Wi-Fi 2.x must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.** |
|
31 |
+The BMS Wi-Fi must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.** |
| 31 |
31 |
|
| 32 |
|
-Here is the example of BMS Wi-Fi header on BMS Main 2.1: |
|
33 |
+Here is the example of header for additional devices on BMS Main 2.1: |
| 33 |
33 |
|
| 34 |
34 |
[[image:1734098739638-850.png||data-xwiki-image-style-alignment="center" height="460" width="450"]] |
| 35 |
35 |
|
| 36 |
|
-= Configuration procedure = |
|
37 |
+= Configuration = |
| 37 |
37 |
|
| 38 |
|
-Configuring the BMS Wi-Fi 2.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]]. |
|
39 |
+Configuration of the BMS Wi-Fi must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]]. |
| 39 |
39 |
|
| 40 |
|
-(% class="box warningmessage" %) |
|
41 |
+Typically, the connection settings are in the “Connectivity -> Wi-Fi” section of the settings. |
|
42 |
+ |
|
43 |
+(% class="box infomessage" %) |
| 41 |
41 |
((( |
| 42 |
42 |
To apply new connection settings, it is necessary to restart the BMS. |
| 43 |
43 |
))) |
