Skip to Content

Changes for page BMS Wi-Fi

Last modified by Admin on 2025/03/19 11:48
From version 10.1
edited by Admin
on 2025/03/19 11:48
Change comment: There is no comment for this version
To version 7.1
edited by Admin
on 2025/01/16 16:32
Change comment: Загрузить новое вложение 1737045121902-531.png

Summary

Details

Page properties
Content
... ... @@ -14,7 +14,7 @@
14 14  |Supply voltage, V|5.0 ± 0.5
15 15  |Current consumption @5 V, mA (maximum)|400
16 16  |Network frequency, Ghz|2.4
17 -|Supported network standarts|IEEE 802.11b/g/n
17 +|Supported network standarts|IEEE 802.11a/b/g
18 18  |Dimensions (length × width × height), mm|40 × 37 × 15
19 19  |Weight, g|10 ± 5
20 20  |Operating temperature range, °С|-40 to +85
... ... @@ -24,11 +24,10 @@
24 24  (% class="box warningmessage" %)
25 25  (((
26 26  **Attention!**
27 -Connecting the BMS Wi-Fi is performed on powered-off BMS controller!
28 -To prevent the damage of device avoid electrostatic discharges.
27 +Connecting the BMS Wi-Fi 2.x is performed on powered-off BMS controller!
29 29  )))
30 30  
31 -The BMS Wi-Fi must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.**
30 +The BMS Wi-Fi 2.x must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.**
32 32  
33 33  Here is the example of header for additional devices on BMS Main 2.1:
34 34  
... ... @@ -36,11 +36,11 @@
36 36  
37 37  = Configuration =
38 38  
39 -Configuration of the BMS Wi-Fi must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]].
38 +Configuration of the BMS Wi-Fi 2.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]].
40 40  
41 41  Typically, the connection settings are in the “Connectivity -> Wi-Fi” section of the settings.
42 42  
43 -(% class="box infomessage" %)
42 +(% class="box warningmessage" %)
44 44  (((
45 45  To apply new connection settings, it is necessary to restart the BMS.
46 46  )))