Skip to Content

Changes for page BMS Wi-Fi

Last modified by Admin on 2025/03/19 11:48
From version 1.1
edited by Admin
on 2024/12/13 14:13
Change comment: There is no comment for this version
To version 10.1
edited by Admin
on 2025/03/19 11:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.WebHome
1 +Battery management systems.WebHome
Content
... ... @@ -14,30 +14,33 @@
14 14  |Supply voltage, V|5.0 ± 0.5
15 15  |Current consumption @5 V, mA (maximum)|400
16 16  |Network frequency, Ghz|2.4
17 -|Supported network standarts|IEEE 802.11a/b/g
17 +|Supported network standarts|IEEE 802.11b/g/n
18 18  |Dimensions (length × width × height), mm|40 × 37 × 15
19 19  |Weight, g|10 ± 5
20 20  |Operating temperature range, °С|-40 to +85
21 21  
22 -= Connection procedure =
22 += Installation =
23 23  
24 24  (% class="box warningmessage" %)
25 25  (((
26 26  **Attention!**
27 -Connecting the BMS Wi-Fi 2.x is performed on powered-off BMS controller!
27 +Connecting the BMS Wi-Fi is performed on powered-off BMS controller!
28 +To prevent the damage of device avoid electrostatic discharges.
28 28  )))
29 29  
30 -The BMS Wi-Fi 2.x must be inserted to the corresponding header of the BMS controller:
31 +The BMS Wi-Fi must be inserted to the corresponding header of the BMS controller. Device must be fixed to the BMS controller by **10mm M3 standoffs and M3 screws.**
31 31  
33 +Here is the example of header for additional devices on BMS Main 2.1:
34 +
32 32  [[image:1734098739638-850.png||data-xwiki-image-style-alignment="center" height="460" width="450"]]
33 33  
34 -.The device must be fixed to the BMS controller by 10mm M3 male-female standoffs and M3 screws.
37 += Configuration =
35 35  
36 -= Configuration procedure =
39 +Configuration of the BMS Wi-Fi must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]].
37 37  
38 -Configuring the BMS Wi-Fi 2.x must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>doc:Battery management systems.WebHome]].
41 +Typically, the connection settings are in the “Connectivity -> Wi-Fi” section of the settings.
39 39  
40 -(% class="box warningmessage" %)
43 +(% class="box infomessage" %)
41 41  (((
42 42  To apply new connection settings, it is necessary to restart the BMS.
43 43  )))
1737045121902-531.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +20.1 KB
Content