Skip to Content

Changes for page BMS Repeater

Last modified by Admin on 2025/05/28 18:26
From version 3.1
edited by Admin
on 2025/02/20 13:20
Change comment: There is no comment for this version
To version 6.1
edited by Admin
on 2025/05/13 16:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,7 +16,7 @@
16 16  |Output voltage, V|5.0±0.5
17 17  |Output current, mA (max)|400
18 18  |Dimensions (length × width × height), mm|64 × 30 × 16
19 -|Weight, g|13±2
19 +|Weight, g|13 ± 2
20 20  |(% colspan="2" %)**Operating conditions**
21 21  |Operating temperature range, ° С|-40÷75
22 22  |Degree of protection from external influences|IP00
... ... @@ -24,6 +24,11 @@
24 24  
25 25  = Connection =
26 26  
27 +(% class="box errormessage" %)
28 +(((
29 +The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
30 +)))
31 +
27 27  The BMS Repeater a header to connect the any BMS Main board and a header to connect any BMS Logic board. It also has jumpers to connect bias resistors to the RS-485 bus subnetworks.
28 28  
29 29  [[image:1734105319233-615.png||data-xwiki-image-style-alignment="center" height="353" width="350"]]