Changes for page BMS Repeater

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,9 +1,9 @@
1		-= General information =
	1	+= General information =
2	2
3	3
4	4	[[image:1734105245109-437.png||data-xwiki-image-style-alignment="center" height="137" width="300"]]
5	5
6		-The BMS Repeater is a device for relaying RS-485 signals from one subnetwork to another and vice versa.
	6	+The BMS Repeater 1.x is a device for relaying RS-485 signals from one subnetwork to another and vice versa.
7	7
8	8	The device provides galvanic isolation up to 3500 V RMS.
9	9
...	...	@@ -23,7 +23,7 @@
23	23
24	24	= Connection =
25	25
26		-The BMS Repeater a header to connect the any BMS Main board and a header to connect any BMS Logic board. It also has jumpers to connect bias resistors to the RS-485 bus subnetworks.
	26	+The BMS Repeater 1.x has a header to connect the BMS Main (X1) and a header to connect BMS Logic (X2). It also has jumpers to connect bias resistors to the RS-485 bus subnetworks.
27	27
28	28	[[image:1734105319233-615.png||data-xwiki-image-style-alignment="center" height="353" width="350"]]
29	29
...	...	@@ -33,7 +33,7 @@
33	33	|Mounting holes|M3
34	34	|Header types|Molex series Mini-Fit
35	35
36		-== X1 – header for communication with BMS Main board ==
	36	+== X1 – header for communication with BMS Main ==
37	37
38	38	[[image:1734105400608-295.png||data-xwiki-image-style-alignment="center" height="83" width="75"]]
39	39
...	...	@@ -43,7 +43,7 @@
43	43	|**3**|**+5V**|Supply voltage 5V
44	44	|**4**|**GND1**|Ground
45	45
46		-== X2 – header for communication with BMS Logic board ==
	46	+== X2 – header for communication with BMS Logic ==
47	47
48	48	[[image:1734105400608-295.png||data-xwiki-image-style-alignment="center" height="83" width="75"]]
49	49