Skip to Content

Changes for page BMS Repeater

Last modified by Admin on 2025/02/20 13:20
From version 1.2
edited by Admin
on 2024/12/13 16:00
Change comment: Update document after refactoring.
To version 3.1
edited by Admin
on 2025/02/20 13:20
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,9 @@
1 -= General information =
1 += General information =
2 2  
3 3  
4 4  [[image:1734105245109-437.png||data-xwiki-image-style-alignment="center" height="137" width="300"]]
5 5  
6 -The BMS Repeater 1.x is a device for relaying RS-485 signals from one subnetwork to another and vice versa.
6 +The BMS Repeater is a device for relaying RS-485 signals from one subnetwork to another and vice versa.
7 7  
8 8  The device provides galvanic isolation up to 3500 V RMS.
9 9  
... ... @@ -20,10 +20,11 @@
20 20  |(% colspan="2" %)**Operating conditions**
21 21  |Operating temperature range, ° С|-40÷75
22 22  |Degree of protection from external influences|IP00
23 +|Header types|Molex series Mini-Fit
23 23  
24 24  = Connection =
25 25  
26 -The BMS Repeater 1.x has a header to connect the BMS Main (X1) and a header to connect BMS Logic (X2). It also has jumpers to connect bias resistors to the RS-485 bus subnetworks.
27 +The BMS Repeater a header to connect the any BMS Main board and a header to connect any BMS Logic board. It also has jumpers to connect bias resistors to the RS-485 bus subnetworks.
27 27  
28 28  [[image:1734105319233-615.png||data-xwiki-image-style-alignment="center" height="353" width="350"]]
29 29  
... ... @@ -31,10 +31,11 @@
31 31  |Overall dimensions (length × width × height), mm|64 × 30 × 16
32 32  |Mounting dimensions (length × width), mm|57 × 23
33 33  |Mounting holes|M3
34 -|Header types|Molex series Mini-Fit
35 35  
36 -== X1 – header for communication with BMS Main ==
36 +== X1 – header for communication with BMS Main board ==
37 37  
38 +Receptacle Housing: Molex 39012040. Terminals: Molex 5556
39 +
38 38  [[image:1734105400608-295.png||data-xwiki-image-style-alignment="center" height="83" width="75"]]
39 39  
40 40  |**Pin**|**Name**|**Description**
... ... @@ -43,8 +43,10 @@
43 43  |**3**|**+5V**|Supply voltage 5V
44 44  |**4**|**GND1**|Ground
45 45  
46 -== X2 – header for communication with BMS Logic ==
48 +== X2 – header for communication with BMS Logic board ==
47 47  
50 +Receptacle Housing: Molex 39012040. Terminals: Molex 5556
51 +
48 48  [[image:1734105400608-295.png||data-xwiki-image-style-alignment="center" height="83" width="75"]]
49 49  
50 50  |**Pin**|**Name**|**Description**