Skip to Content
Last modified by Admin on 2025/03/18 12:50
From version 4.1
edited by Admin
on 2024/12/09 10:42
Change comment: There is no comment for this version
To version 8.1
edited by Admin
on 2025/02/06 11:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Mini 2.WebHome
1 +Battery management systems.BMS Mini.WebHome
Content
... ... @@ -23,6 +23,7 @@
23 23  )))|139.5 × 117 × 17
24 24  |Mounting dimensions (length × width), mm|130 × 111
25 25  |Mounting holes|M3
26 +|Headers X1, X3-X9 type|Molex series Micro-Fit
26 26  
27 27  == Headers ==
28 28  
... ... @@ -166,7 +166,7 @@
166 166  
167 167  (% class="box warningmessage" %)
168 168  (((
169 -**Attention! **The BMS Mini S device is **galvanically connected** to the battery (the minus of the battery is the device ground). In view of this, when a BMS Wi-Fi or BMS GSM module is connected to the device, the antenna braid will also be galvanically connected to the battery (connected to the battery negative). It is recommended to** isolate the antenna cable from the battery case **to prevent negative potential from appearing on the case.
170 +**Attention! **The BMS Mini device is **galvanically connected** to the battery (the minus of the battery is the device ground). In view of this, when a BMS Wi-Fi or BMS GSM module is connected to the device, the antenna braid will also be galvanically connected to the battery (connected to the battery negative). It is recommended to** isolate the antenna cable from the battery case **to prevent negative potential from appearing on the case.
170 170  )))
171 171  
172 172  === J1 – jumper for switching CAN bus terminal resistor ===