Skip to Content
Last modified by Admin on 2025/03/18 12:50
From version 3.1
edited by Admin
on 2024/12/09 10:40
Change comment: There is no comment for this version
To version 1.1
edited by Admin
on 2024/12/09 10:17
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Mini 2.WebHome
1 +drafts.BMS Mini S.WebHome
Content
... ... @@ -15,10 +15,10 @@
15 15  
16 16  [[image:1733738313786-252.png||data-xwiki-image-style-alignment="center" height="150" width="545"]]
17 17  
18 -|(((
18 +| (((
19 19  **Parameter**
20 20  )))|**Value **
21 -|(((
21 +| (((
22 22  Overall dimensions (length × width × height), mm
23 23  )))|139.5 × 117 × 17
24 24  |Mounting dimensions (length × width), mm|130 × 111
... ... @@ -66,8 +66,10 @@
66 66  
67 67  Mini0USB connector is used for configuring the BMS via ElectricDeviceMonito
68 68  
69 -=== X3 – header for discrete inputs and outputs signals.[[image:1733738860923-996.png||data-xwiki-image-style-alignment="center" height="90" width="283"]] ===
69 +=== X3 – header for discrete inputs and outputs signals. ===
70 70  
71 +[[image:file:///C:/Users/INASIB~~1/AppData/Local/Temp/msohtmlclip1/01/clip_image003.emz]][[image:1733738860923-996.png||data-xwiki-image-style-alignment="center" height="90" width="283"]]
72 +
71 71  |**Pin**|**Name**|**Description**
72 72  |**1**|**DIN1**|Discrete input 1 “dry contact” (+5V)
73 73  |**2**|**DIN2**|Discrete input 2 “dry contact” (+5V)
... ... @@ -170,18 +170,18 @@
170 170  
171 171  (% class="box warningmessage" %)
172 172  (((
173 -**Attention! **The BMS Mini S device is **galvanically connected** to the battery (the minus of the battery is the device ground). In view of this, when a BMS Wi-Fi or BMS GSM module is connected to the device, the antenna braid will also be galvanically connected to the battery (connected to the battery negative). It is recommended to** isolate the antenna cable from the battery case **to prevent negative potential from appearing on the case.
175 +**Attention! **The BMS Mini S device is **galvanically connected** to the battery (the minus of the battery is the device ground). In view of this, when a BMS Wi-Fi or BMS GSM module is connected to the device, the antenna braid will also be galvanically connected to the battery (connected to the battery negative). It is recommended to** isolate the antenna cable from the battery case **to prevent negative potential from appearing on the case.
174 174  )))
175 175  
176 176  === J1 – jumper for switching CAN bus terminal resistor ===
177 177  
178 -To connect the terminal resistor between the** CAN_H** and **CAN_L** lines, install the jumper J1 according to the following figure:
180 +To connect the terminal resistor between the** CAN_H** and **CAN_L** lines, install the jumper J1 according to the following figure:
179 179  
180 180  [[image:1733738660910-372.png||data-xwiki-image-style-alignment="center" height="85" width="162"]]
181 181  
182 182  === J2 – jumper for switching RS-485 terminal resistor ===
183 183  
184 -To connect the terminal resistor between the** RS485_A** and **RS485_B** lines, install the jumper J1 according to the following figure:
186 +To connect the terminal resistor between the** RS485_A** and **RS485_B** lines, install the jumper J1 according to the following figure:
185 185  
186 186  [[image:1733738660910-372.png||data-xwiki-image-style-alignment="center" height="85" width="162"]]
187 187  
... ... @@ -194,7 +194,7 @@
194 194  
195 195  Begin the connection with the negative line of the battery: the “C0“ is connected to the “B-“, then the first cell (C1) is connected, then the second (С2), etc. If not all inputs of the cells are used, then the remaining inputs are connected to the cell with the most potential.
196 196  
197 -[[image:1733738660912-678.png||data-xwiki-image-style-alignment="center" height="326" width="650"]]
199 +[[image:1733738660912-678.png||data-xwiki-image-style-alignment="center" height="474" width="945"]]
198 198  
199 199  (% class="box warningmessage" %)
200 200  (((