Skip to Content
Last modified by Admin on 2025/03/18 12:50
From version 13.1
edited by Admin
on 2025/03/18 12:19
Change comment: There is no comment for this version
To version 15.1
edited by Admin
on 2025/03/18 12:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,13 +3,13 @@
3 3  
4 4  == Safety rules ==
5 5  
6 -To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, at least one contactor able to break the load and charge circuits must be connected to the BMS.
6 +To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, **at least one contactor** able to break the load and charge circuits must be connected to the BMS.
7 7  
8 8  Before use, **configure the system**. Proper operation of the BMS is possible only if it is correctly configured.
9 9  
10 10  It is not recommended to use the system in batteries formed by several series of cells connected in parallel. To increase capacity, it is recommended to connect several cells in parallel groups, and then connect the groups in series.
11 11  
12 -(% class="box warningmessage" %)
12 +(% class="box errormessage" %)
13 13  (((
14 14  The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
15 15  )))