Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 7.1
edited by Admin
on 2025/02/27 12:09
Change comment: There is no comment for this version
To version 5.1
edited by Admin
on 2024/12/23 16:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,28 +7,28 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB only);
11 -* via device configuration interface (available via USB, CAN and TCP).
10 +* via USB;
11 +* via CAN bus;
12 +* via RS-485 bus;
13 +* using the device configuration interface (available via USB, CAN, and Wi-Fi).
12 12  
13 13  The following hardware and software are required:
14 14  
15 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 -* USB/CAN adapter for updating by CAN bus;
17 -* USB/RS-485 adapter for updating by RS-485 bus;
18 -* USB-mini cable for updating by USB;
19 -* BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via configuration interface by TCP;
20 -* Firmware file (must be in "Motorola S-record .srec" format).
17 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini.
18 +* USB/CAN adapter for updating via CAN bus.
19 +* USB/RS-485 adapter for updating via RS-485 bus.
20 +* Firmware file (must be in Motorola S-record format).
21 21  
22 -== Updating via bootloader ==
23 -
24 24  Firmware updating includes two steps:
25 25  
26 26  * starting the bootloader;
27 27  * uploading the firmware file to the BMS Mini flash memory.
28 28  
27 +== Updating via USB, CAN, RS-485 ==
28 +
29 29  **~1. Start the device bootloader.**
30 30  
31 -* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB, CAN or TCP connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
31 +* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
32 32  
33 33  [[image:1733921952732-294.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="166" width="600"]]
34 34  
... ... @@ -76,11 +76,11 @@
76 76  
77 77  ~1. Perform connection to the device and user authentication in the Unified monitor.
78 78  
79 -2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button.
79 +2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button,
80 80  
81 81  [[image:1733922048352-144.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="164" width="600"]]
82 82  
83 -3. Select the "Motorola S-Record files (*.srec)" on the bottom right corner and specify the path to the file with the new main firmware (*.srec).
83 +3. Select the "Motorola S-Record files (*.srec)" on the bottom right corner and specify the path to the file with the new main firmware: (*.srec).
84 84  
85 85  [[image:1733922532918-136.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="301" width="527"]]
86 86