Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 7.1
edited by Admin
on 2025/02/27 12:09
Change comment: There is no comment for this version
To version 12.2
edited by Admin
on 2025/03/03 13:11
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,15 +7,17 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB only);
10 +* via bootloader (available via USB, CAN and RS-485);
11 11  * via device configuration interface (available via USB, CAN and TCP).
12 12  
13 13  The following hardware and software are required:
14 14  
15 15  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 -* USB/CAN adapter for updating by CAN bus;
17 -* USB/RS-485 adapter for updating by RS-485 bus;
18 -* USB-mini cable for updating by USB;
16 +* Communication interface:
17 +** USB-CAN adapter for updating by CAN bus;
18 +** USB/RS-485 adapter for updating by RS-485 bus;
19 +** USB-mini cable for updating by USB;
20 +**
19 19  * BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via configuration interface by TCP;
20 20  * Firmware file (must be in "Motorola S-record .srec" format).
21 21  
... ... @@ -59,10 +59,11 @@
59 59  
60 60  [[image:1733922048351-746.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
61 61  
62 -* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate for the COM port:
64 +* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate (set up in BMS settings):
63 63  
64 -[[image:1733922048352-403.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
66 +[[image:1741006591120-110.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
65 65  
68 +
66 66  2.3 Click the "Browse..." button and select the *.srec file with the main firmware.
67 67  
68 68  2.4 Click the “Update” button **while the device is in bootloader mode**. The process of loading the new firmware into the device memory will begin.
1741006591120-110.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +7.3 KB
Content
1741006631411-613.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +7.3 KB
Content