Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 5.4
edited by Admin
on 2024/12/26 17:26
Change comment: There is no comment for this version
To version 5.2
edited by Admin
on 2024/12/26 17:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,16 +7,18 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB only);
11 -* via device configuration interface (available via USB, CAN and TCP).
10 +* via USB;
11 +* via CAN bus;
12 +* via ;
13 +* using the device configuration interface (available via USB, CAN, and Wi-Fi).
12 12  
13 13  The following hardware and software are required:
14 14  
15 15  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 16  * USB/CAN adapter for updating via CAN bus;
17 -* USB-mini cable for updating via USB;
18 -* BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via TCP;
19 -* Firmware file (must be in "Motorola S-record .srec" format).
19 +* USB-mini cable for updating via Serial port;
20 +*
21 +* Firmware file (must be in Motorola S-record format).
20 20  
21 21  == Updating via bootloader ==
22 22  
... ... @@ -27,7 +27,7 @@
27 27  
28 28  **~1. Start the device bootloader.**
29 29  
30 -* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB, CAN or TCP connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
32 +* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
31 31  
32 32  [[image:1733921952732-294.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="166" width="600"]]
33 33